-
Battery Feed Test
- Integral Lights- ON
- Battery feed test button
- -(Check Feeder Fail light On)
- -(Check Standby Power On )
- -(Check Standby Instruments Lit Up)
- Uncage Standby attitude indicator
- Left ITT lit
- Left RTU on
- Recage Standby attitude indicator
- --Battery to Emergency
- AOA indexer lit
- AC BUS SHED light On
- ICE DETECT light on
- Instrument floodlights on
- Left N1 on
- Left N2 on
- Left RTU on
- BATT CUT OFF/INV 1 FAIL light On
- Landing gear position lights lit (3 green)
- Copilot’s clock On
-
Master Test System
- PF- "Call My Go's"
- --Master Switch - Flap ASYM, Annunciator On, Go Light On
- CP- "GO"
- --Master Switch - L FIRE DET, Fire Bell On. Fire Bell Silenced
- CP- "GO"
- (L ENG FIRE PUSHLIGHT On, Go Light On)
- --Master Switch - R FIRE DET, Fire Bell On. Fire Bell Silenced
- CP- "GO"
- (R ENG FIRE PUSHLIGHT On, Go Light On)
-
Fuel Systems Check
(Ensure Jet pump switches - NORM)
- Boost pumps - OFF
- Throttles- IDLE then CUT OFF
- Fuel px low annunciators (2)- Illuminated
- LH/V Switch - Lift cover and push -(Close Illuminated )
- Left Boost Pump- ON (check light)
- Fuel px low annunciators (2)- Illuminated
- LH/V Switch- Lift cover and push - (Open Illuminated)
- Left fuel px low annunciator- Off
- Left boost pump- AUTO (Light Out)
- Left fuel px low annunciator- On
- ---
- RH/V Switch - Lift cover and push-(Close Illuminated)
- Right Boost Pump- ON (check light on)
- Fuel px low annunciators (2)- Illuminated
- RH/V Switch- Lift cover and push - (Open Illuminated)
- Left fuel px low annunciator- Off
- Right boost pump- AUTO (Light Out)
- Right fuel px low annunciator- On
-
Fuel Crossfeed
4,3,2,1 ,none
- 4- FUEL XFEED, Opposite JET PUMP, XFEED in transit, BOOST PUMP
- 3- FUEL XFEED, Opposite JET PUMP, BOOST PUMP
- 2- FUEL XFEED, BOOST PUMP
- 1- FUEL XFEED light on shroud panel
- 0- No fuel pressure lights
-
Autopilot
- A/P- Engage (P)
- --EADI displays: 4 green (pitch, roll, AP/L, and YD) and a white light (ALTS).
- Pitch trim- Actuate (P)
- Verify- A/P disconnect, yaw damper engaged, aural tone, and EADI yellow A/P flashes.
- A/P- Engage (P)
- A/P disengage switch- Disengage(P)
- Verify- A/P and yaw damper disconnect, aural tone, and EADI yellow A/P flashes
- (Copilot repeats)
- A/P- Engage (P)
- Go-around button- Push (P)
- Verify- A/P disengages and yaw damper remains engaged.
- A/P disengage switch- Disengage (P)
- Verify- aural tone silences, EADI A/P is white, and yaw damper disengages.
|
|
