1. Home
  2. Flashcards
  3. Preview

file.txt

  1. GEN 2 or GEN 3, GEN 4 or APU GEN OFF light on.
    Use reset procedure, or place associated BUS MONITORING switch ON. If an engine‐driven generator light remains on steady throughout reset procedures, or goes out momentarily and comes back on, mission should be aborted.

    Note

    If the APU generator control circuit breaker is out, the APU GEN OFF light will be on. Automatic APU load monitoring above 8,000 feet will be disabled; however, the generator will assume the load.

    • CAUTION
    • Generator supervisory panels shall not be exchanged until appropriate maintenance actions are performed.
    • Note
    • Ensure GEN 4 AUX CONT and GEN 4 TRANS circuit breakers are set appropriately.
  2. TRANSFORMER RECTIFIER OVERHEAT light ON.
    Pull respective circuit breaker; No. 3 located at the flight station and No. 1 and 2 located at the main load center.
  3. EXTERNAL PWR AVAILABLE light ON (neon).
    Indicates electrical power is connected to the aircraft. Light will glow whether or not external power is selected.

    a. EXTERNAL PWR
    AVAILABLE light ON
    (neon), but no power into
    aircraft.
    Wrong phase, nosegear uplock not
    properly positioned, battery not
    connected, generator No. 4
    runaround feeder circuit breaker out,
    external power control circuit
    breaker out.
    • Move EXTERNAL POWER switch to
    • RESET then ON. Check nose gear
    • uplock position. Check battery
    • condition. Check No. 4 runaround
    • feeder circuit breaker. Check external power control circuit breaker.
  4. b. EXTERNAL PWR AVAILABLE light ON partial power into aircraft.
  5. Transformer‐rectifier No. 3 ganged circuit breaker out. Essential DC bus feeder circuit breaker No. 2 out. Monitorable Essential AC ganged circuit breaker behind copilot out. Monitorable Essential bus switch off. Check TR 3 circuit breaker.
  6. Check essential DC bus feeder circuit breaker No. 2. Check Monitorable Essential AC ganged circuit breaker in. Check Monitorable Essential bus switch.
  7. 4. EXTERNAL POWER light ON. External power supplying power to
    aircraft system.
    EXTERNAL POWER switch is on.
Author
flytexas
ID
869
Card Set
file.txt
Description
elec/foul wx
Updated

  1. Home
  2. Flashcards
  3. Preview