ISP Golden Bears

Accidents are_______________.

Developing a safe attitude begins by learning to ________ __________

By practicing safe work habits now, you will soon learn to work quickly ____ _____ ___.

Developing a safe attitude is a good way to show ____ for yourself and the people you work with.

Always use ____ protection when you are in the shop.

If a solvent or other chemials ever gets intgo your eyes, flush them ___ with water.

_____ ______ can get caught in machinery or in a an engine.

Work clothes are made for working and will stand up better to ____ ____ ____ than stree clothes.

_____ ____ are not stylist, but they are sturdy and provide proper support for your feet.

Sandals or canvas shoes offer no protection for ____ ____ _____ objects.

Remove all _____ before starting work.

If you have _____ _____ , wear a cap, headband, or hairnet to keep your hair out of the way.

Always use your ___ instead of your back to lift heavy objects.

If something you are lifting or carrying ______ _____ ____, get out of the way and let it fall.

A ______, ______ work area is a safe work area.

Wipe up all spills immediately to avoid _____ _____ ____ hazards.

Carrying sharp or pointed tools wih their points _____ _____ ______.

Give tools to others ______ first.

Never put sharp tools in your _______ .

Report _______ ______ or ______ tools to your instructor.

Don't lay tools where they might ______ to the floor or onto someone working below.

Store jacks with the handle ________ _______ to avoid tripping over it.

Store _____ up against the wall.

Do not use ________ _______ or lights while standing on a wet floor.

Be sure electrical tools are properly ________.

Use chisels only on mentals _______ than the cutting edge of the chisel.

Do not use punches or chisels with ________ heads.

Always use the proper type of hammer for the job. A large variety of types and _______ _________ are available.

Be sure the hammer head is _________ on the handle.

Using too large or too small a screwdriver could cause it to _______.

Don't use a screwdriver as a ______ ________.

Don't use a ______ in place of a chisel or a punch.

Don't operate power equipment while standing in _______.

Don't put a 3-wire plug into a 2-wire outlet, by using an _______ or breaking off the groud prong.

If using a saw, make sure that the blade is aways from the ________.

Always disconnect electrical power cords by pulling on the _____.

Always select an extesion cord with a large enough _____ ______ for the equipment used.

_______ wrenches are more likely to slip under pressure than other types fo wrenches.

Don't use equipment with damged _____.

______ wrenches are least likely to slip off a nut or bolt.

Be sure the wrench is ______ on the fastener completely.

When you use a wrench, it is safer to ____ than to ____.

If you must push on a wrench, do it with an _______ _______.

Use pilers only for their _______ _______ .

Never use pilers in place of a ______ or _______.

Be sure to use ________ ________ when you work with electricity.

Be careful not to get your finger caught in _______ pliers.

Never use a file without a _________.

Never use a file as a ______ tool.

Always hold the item being filed in a _____ or other holding device.

Never use your ______ to brush away chips or fillings.

Both the blade and the material being cut by a hacksaw can get very ______.

Don't use any equipment until you have been shown how to use it _______ and _______.

Always get _______ from the instructor before using equipment.

Always stay out of the ______ _______ when someone is using a machine.

Never leave a machine until it has come to a _____ _____.

If anything seems to be wrong with a mahine, _____ ______ ______ and tell the instructor immediately.

Always wear _______ _______ when using compressed air to clean parts.

Never direct the ______ and ____ toward yourself or others.

Know where the _____ ______ are and how to use them.

Put all used rags in _______ _______ ______.

Never use ______ as a cleaning solvent

Never spray paint without proper _______.

Place all finishing supplies in a _______ cabinet .

Have a good safety ________ and always ______ about what you are doing at alll times.

Do not stand inside________ ________, or talk to the operatior of a machime, while in use.

Always wear _____ ______ while operating machinery.

Know where all _____ ______ _____ are in case a classmate is in trouble.

Whenever in doubt____.

If a machine appears to have a problem for any reason, tell the instuctor _______.

If an accident happpens report it to _______ ______ right away.

Minor injuries can probably be treated in the shop or the _______ _______ .

The more you know about ________ __________, the better equipped you will be to help and accident victims.

Think __________ all the time.

Don't lay cords where they will get _____ ______ by wheels.