-
Which squadrons form a maintenance group?
Maintenance, operations, quality assurance.
-
QA recommends possible corrective actions to which level?
Supervisors.
-
Who monitors flying and maintenance schedules, and maintains visibility of fleet healthindicators?
Maintenance operations center.
-
When you are assigned to an aircraft maintenance squadron as an engine troop, to what flightwill you most likely be assigned?
specialist.
-
What type of training is provided to help you learn the knowledge portion of your job?
On-the-job training.
-
You may attend the ALS after having how many months in the Air Force?
48.
-
Which program’s purpose is to ensure safe and healthy working conditions for all Air Forceemployees?
AFOSH
-
Occupational health is regulated by Air Force series
91
-
Which Air Force instruction defines quality maintenance and requires maintenance personnelto display integrity and comply with all written guidance?
21–101.
-
Prior to starting any maintenance on the aircraft, what can you do to ensure that it is safe toproceed?
Check with other personnel working inside or outside the aircraft.
-
How far does a propeller’s axis of rotation extend?
10 feet to the front and 5 feet from the rear.
-
To avoid the engine exhaust blast, what is the minimum distance in feet to the rear of theaircraft?
200
-
FOD is normally caused by
people
-
Who has overall responsibility for the FOD program?
Maintenance group commander.
-
During flightline and test cell operations, you may be exposed to
carbon moxide
-
Toxic materials are easiest to get into the body and cause rapid toxic reactions when theyare in the form of
gases
-
Who is responsible for providing you with training on how to wear, use, and maintainpersonal protective equipment
safety
-
Hazardous waste storage areas must prevent
. unauthorized entry.
-
A common method for disposing of hazardous wasted is
dilution
-
For hazardous waste disposal, it is unlikely the Air Force can justify
incineration
-
A specialized function of the supply mission is
repair
-
From what perspective does the RSS manage supply?
weapons system
-
Which Base Supply function manages the repair cycle system?
repair cycle support system
-
Selected equipment items, when returned to depot because of their design characteristicsfunction or application, are predetermined to require
overhaul
-
Which supply document provides a means for organizations to review all documentnumbers processed during the day by the SBSS?
Repair Cycle Asset Management Listing (D23).
-
) Base Supply must deliver numerous parts to numerous organizations on a prioritized basisbecause of what difference in each organization?
mission
-
What does a completed AFTO Form 350 serve to identify?
Origin of an item.
-
Which provides a block-by-block explanation of how to document the AFTO Form 350tag?
TO 00–20–2.
-
If you are TDY and IMDS and SBSS are not available, what form would you use to orderan engine part?
AF IMT 2005
-
If you need detailed information concerning the AF IMT 2005 codes and entries, refer toAFMAN
23–110.
-
Which form is attached to items that are awaiting parts or maintenance?
DD Form 1575.
-
Which item is one that a storage time period must be assigned to ensure that it will performsatisfactorily over a specified period of time?
shelf life
-
When a bench stock item has a type I shelf-life, it means the item
has a definite non-extendible period of shelf-life
-
A Category I DR is used to report a deficiency
that, if uncorrected, will cause major loss or damage to equipment or a system.
-
Within how many hours must Category I DR be forwarded to the screening point?
24
-
Which type of items must be reflected on the CA/CRL?
Equipment Authorization Inventory Data.
-
To become an equipment custodian, you must be appointed by the
commander
-
The first part of a TO number identifies the
category and type of equipment in the TO.
-
The second part of a TO number gives the
type of equipment in the TO.
-
In which type of TO would you find a list of TOs for a specific category of equipment?
index
-
Which type of technical manual is divided into tasks that cover a particular maintenanceaction?
job guide
-
Which type of additional data is not provided in interactive electronic technical manuals(IETMS)?
Urgent recommendations.
-
What section of the IPB contains an explanation of the coding used in the IPB?
introduction
-
What category of TCTO is issued to correct unsafe conditions that can result in a fatality orserious injury to personnel?
Immediate action.
-
Which TO covers information concerning the Air Force TO system?
00–20–2.
-
How can you tell when the text or a picture in a TO has been changed?
The word “changed” will be marked on the text or picture
-
An AFTO IMT 22 is not submitted for
preliminary TOs.
-
Who makes sure the AFTO IMT 22 is valid and warrants submission?
Supervisor of initiator.
-
Which AFTO IMT 22 recommendation would you submit which, if not corrected, couldcause personnel injury or damage to equipment or property?
emergency
-
What are the two classifications of failures in RCM?
Potential and functional.
-
In RCM, which preventative maintenance task is a scheduled inspection to detect a potentialfailure condition?
on condition
-
The primary goal of the ET&D program is to prevent or limit damage to turbine engines by
early detection of performance degradation and/or failures
-
Within the ET&D program, to whom do flightline personnel transfer collected data foranalysis
Base engine maintenance shop.
-
Which technicians provide maintenance activity data to the ET&D program?
Propulsion and nondestructive inspection.
-
What drives the creation of a CRP?
Customer wait time and transportation constraints.
-
Who maintains accountability of CIRF assets and reports their status?
Production supervisor.
-
When a CIRF ships a replacement asset to a deployed unit, who is responsible for ensuringall appropriate documentation is completed?
CIRF personnel
-
What supports base-level technicians by providing technical assistance and performing anyrepairs beyond their responsibility/capability?
Depot maintenance
-
Depot maintenance support base-level technicians by
providing technical assistance and performing repairs beyond their capability.
-
Depot level support includes CLSS crews, depot maintenance support, maintenanceassistance, and
field teams.
-
A primary objective of the engine reporting system is to
maintain accurate and timely engine inventories.
-
The key to making the CEMS work is
accurate and timely data at the lowest level.
-
For how many categories of reporting does the CEMS establish and maintain records?
2
-
You should record the removal and replacement of engine accessories on which one of thefollowing AFTO Forms?
95
-
To document information concerning the status of engine TCTO, use AFTO Form
95
-
What is the purpose of the Lead the Fleet/Pacer programs?
Identify engines requiring TCTO maintenance
-
Which is not a Lead the Fleet/Pacer program objective?
Reducing customer wait time for serviceable assets.
-
How many years ahead should participating units accelerate engines, modules, andaccessories?
2
|
|
