1. Home
  2. Flashcards
  3. Preview

Niamh Cullen tech Y8 tools and equipment

  1. Workshop dress:
    Name 4 things you should make sure of when dressing for workshop work?
    • 1. Don't let SLEEVES, ties, hair etc hang loose
    • 2. Wear protective GOGGLES
    • 3. Wear protective SHOES
    • 4. Wear protective GLOVES
  2. Workshop dress:
    When working with acids, what should you ensure?
    You're wearing GOGGLES to protect your eyes.
  3. Workshop - preparation:
    Name 4 things you should check before you BEGIN operating a machine?
    • 1. ensure that your work is in a VICE
    • 2. ensure that machine GUARDS are properly in place
    • 3. ensure that cutting tools are SHARP and are set correctly
    • 3. ensure you know where the STOP button is
  4. Workshop - when operating the machine, you should (3):
    • 1. keep your hands away from MOVING PARTS
    • 2. ensure GOGGLES are covering your eyes
    • 3. keep your hands away from the CUTTIN EDGE
  5. Workshop behaviour:
    Name 3 correct behaviours when in a workshop?
    • 1. never RUN
    • 2. get PERMISSION to use a machine
    • 3. if you have any DOUBTS, ask teacher
  6. Workshop - working with resins:
    What should you make sure of before working with resins?
    Ensure that you are wearing GLOVES or BARRIER CREAM.
  7. Tools and Equipment:
    What's this and what is it used for?
    Image Upload 2
    It's a FRET SAW.I

    It's used for cutting out intricate shapes and patterns and has a very thin blade.
  8. Tools and Equipment:
    What is this called and what is it used for?
    Image Upload 4
    A HEGNERSAW or SCROLL SAW.

    It's a motorised version of the Fret Saw. It's used for cutting intricate shapes in wood and can cut wood up to 25mm thick. It is a very dangerous machine to use!
  9. Tools and Equipment:
    What is this called and what is it used for?
    Image Upload 6
    A BANDFACER.

    It's used for sanding (smoothing) wood surfaces.
  10. Tools and Equipment:
    What is this called?
    Image Upload 8
    A VICE, or vice-grip.

    It's used for holding things tightly in place.
  11. Tools and Equipment:
    What is a cramp and what's it used for?
    It's a G shaped device used for tightening two pieces of wood together to make the glue set properly.
Author
Anonymous
ID
58763
Card Set
Niamh Cullen tech Y8 tools and equipment
Description
niamh Y8 tech - tools and equipment
Updated

  1. Home
  2. Flashcards
  3. Preview