-
If you work on an aircraft on the flight line, you are doing which level of maintenance?
Organizational
-
The three general functions of dividing the CAMS database are?
Maintenance, retrieval, and reporting
-
Which CAMS subsystem provides the capability to establish a computerized file of required maintenance actions?
Maintenance events
-
What is the correct method for writing 30 January 1998?
19980130
-
A symbol entered on a maintenance form reflects the opinion of the?
individial making the entry
-
When a new AFTO Form 781A is inititated, what kind of discrepancies cannot be transferred to the AFTO Form 781K?
Red X
-
Which section of the AFTO Form 244 lists discrepancies?
V(4)
-
The five authorized inspection concepts used by the Air Force are?
Periodic, Phase, Isochronal, Prog. Depot Maint., Airline/Manuf. Maint.
-
Reducing the time an aircraft is out of commission is an objective of which inspection?
Phase
-
What is not one of the elements of the maint. training program?
Cross-Utilization Program
-
The primary responsibility for formal upgrade training rests with?
The commander
-
The main source of material deficiency information is?
CAMS
-
A Cat II, DR that has been submitted for a defect in workmanship must be forwarded to the screening point within?
3 Workdays
-
The first part of a national stock number indicicates the?
Supply Classification
-
The second position of the Expendability/Recoverability/Reparability/Cost Designator Code(ERRC) indicates?
Repair level
-
Air Force property responsibility is imposed by law on?
All military and civilian employees
-
What types of property responsibility can be charged to DOD personnel?
Command, Custodial
-
An airman who signs out the toolbox assumes which type of property responsibility for that?
Custodial
-
How can personnel be relieved from property responsibility?
Turn-In or transfer
-
Career Development Courses are an example of?
A specialized publication
-
The list of applicable publications (LOAPS) lists Technical Orders that apply to?
A specific aircraft
-
Which TO explains how to maintain and inspect a particular weapons system?
Technical Manual
-
A series of red X's printed around the border of the first page of a TCTO signifies?
An immediate action TCTO
-
In the basic TO numbering system, each TO number will have a minimum of?
Three number groups
-
The Maintenance Intergrated Data System (MIDAS) pg. number is?
A six-digit numbering system expressed as three elements of two digits each
-
The "XD" in fault isolation code 33-10-XD-02 identifies the?
Specific Fault
-
While troubleshooting, you are using a wiring diagram to help you locate a malfunctioning component. After determining which component is faulty, you want to determine its part number. To do this, you would check the wiring diagram's?
Reference designator
-
Revisions are issued when changes exceed what percentage of the basic TO?
80
-
Safety and operational supplements to technical orders should be filed in?
Reverse numerical sequence in front of the basic TO
-
To correct errors in a technical order, you should submit an AFTO Form ___?
22
-
Which deficiency report is used for a TO deficiency that involves safety or the unit mission?
Emergency
-
How far away from parked aircraft should LOX carts be stored?
75 ft.
-
You must observe aircraft oxygen gauges at all times during servicing operations to?
Prevent overfilling
-
When you are servicing an aircraft with liquid nitrogen, do not wear?
Shoes which fit loosely around the top
-
If your skin comes in contact with liquid nitrogen you should?
Seek medical attention immediately
-
Which classification identifies a Class/Division 1.4 explosive?
Low explosive weight items
-
What must you ensure when you are transporting squibs?
The squibs are in a protective container
-
While working on high-voltage equipment, you must have a safety observer. This individual must know how ____?
To turn off the equipment
-
How much electrical current does it take to cause muscle paralysis?
.015 amps
-
Which area of a LRU is most susceptible to ESD damage?
Connector pins
-
Human awareness of static electricity is at approximately?
3500 Volts
-
For personnel ESD grounding, you must use a skin contact wrist strap connected to the workbench surface. This strap must have a resistance of at least _____?
1 Megohm
-
Which situation illustrates a physical hazard presented by a chemical hazard?
Second degree skin burn
-
What is the minimum information required on a hazardous chemical inventory?
Name of the material
-
Which element must be included in a workplace written hazard communication program?
Hazardous material inventory
-
Which air force regulation/instruction is a source of information for the prevention of accidents?
AFI 91-202
-
Who is responsible for seeking out and elmininating accident causes?
Everyone
-
What is considered to be a safe distance in front of jet engine intake ducts?
25 ft.
-
You are performing a task that requires you to turn OFF the power to an aircraft system. In this situation, which AFTO Form would you attach to the system's circuit breaker?
1492
-
What is one of the primary causes for FOD?
Careless maintenance personnel
-
Which mishap prevention tag is used to warn personnel against potential hazards?
Caution
-
Which form is used to report ground safety accidents involving personnel (not involving aircraft)?
AF Form 711
-
High-frequency radiation is not produced by?
Nuclear weapons
-
Which type of nuclear radiation is the strongest?
Gamma
-
What is the unit of measure for radiation quantity?
Roentgen
-
What is the temporary storage location designed to store nuclear materials in transit through a base called?
Safe Haven
|
|