NEETS 16 - Oscilloscope and Spectrum Analyzer

  1. What assures proper impedance matching between the probe and oscilloscope?
    Impedance equalizer
  2. Deflection sensitivity for a given CRT might typically be how many millimeters per volt?
    0.2
  3. What is the angle the outgoing electron beam makes with the CRT center line axis between the plates called?
    Angle of deflection
  4. What is used to show the shape of a video pulse appearing at a selected equipment test point?
    Oscilloscope
  5. What test equipment is used to sweep over a band of frequencies to determine what frequencies are being produced by a specific circuit under test, and then the amplitude of each frequency component?
    Spectrum analyzer
  6. What is a calibrated scale (made of clear plastic) of amplitude versus time that is placed on the face of the CRT?
    Graticule
  7. What refers to the length of time the phosphor glows after the electron beam is removed?
    Persistence
  8. What allows you to view two independent signal sources as a dual display on a single CRT?
    Dual-trace operation
  9. What is used to examine the frequency spectrum of radar transmissions, local oscillators, test sets, and any other equipment operating within its testable frequency range?
    Spectrum analyzer
Author
Coreyk58
ID
359085
Card Set
NEETS 16 - Oscilloscope and Spectrum Analyzer
Description
Updated