CCO 4

Jib offset is the jib angle to the

All Hazards and problems that are found on the worksite should be identified

Which of the following OSHA regulations govern suspended personnel platforms

According to ASME B30.5 the prohibited zone for powerlines that are 60kV is

What percentage of gross capacity is used when lifting with more than one crane

You are required to pass a physical exam every how many years according to ASME b30.5

How many broken wires at an end socket of a standing wire rope are allowed before the rope must be replaced

When operating a mobile crane, you inspect you running wire rope at least

When lifting a load with more than one crane, it is important to

Rotation resistant wire rope has a design factor of

Line pull is

Boom length is

The weight of the stowed jib used in the load calculation is

A cranes rated capacity is based on

When lifting a suspended personnel platform the safety factor for the rigging hardware is

If using cranes of different rated capacities, the crane with the larger rated capacity

Hoist ropes that are not rotation resistant must have a design factor of

Backward stability on R/T crane could be a problem with the crane is working

It is important to inspect rotation resistant wire rope more frequently because

It is important to know when lubricating wire rope, that the lubricant must

Breaking strength divided by the design factor equals

Electrocution occurs when

If determining boom tip elevation is important the best way to determine this is to

When determining what position to dog the machine over night and high winds are expected

When crane is in transit and you are required to pass under 50kV powerlines what is OSHA's minimum required clearance

Timber mats work best when they are

The only time an employer may use a suspended personnel platform is when

What is the greatest cause of ground personnel deaths

When lifting a suspended personnel platform the crane must be de-rated by

Boom deflection will

Increasing the distance from the cranes center of gravity and the tipping axis will

The effect of a loads leverage being greater than the cranes leverage is

Blocking under the outrigger pads/ float shall be

With a pick and carry operation, the rated tipping capacity is based on what percentage of the total tipping capacity

All telescopic boom cranes must be equipped with

A cranes ground pressure can approach a weight that is

Operating a crane with a long boom, on uneven ground, you should

On a hydraulic truck crane that has all five outriggers properly positioned on firm supporting surfaces, the working area diagram from the load capacity chart will indicate that the "over the front" area is

An operator performing a pick and carry operation with a rough terrain crane should keep the load

When a cranes hydraulic boom sections are required to be extended equally and they are not the

A telescopic crane is going to lift a personnel platform, what is required

Before making a near capacity lift with a crane, the operator must

A stationary load is

When operating a R/T and extending the outriggers from the upper you should

The effective weight of the fly/ jib when erected from the stowed position

When swinging the load of any crane on crawlers, it will exert the most ground pressure over the

How does the effective weight of the stowed job/ extension relate to the actual weight of the jib/ extension

When testing a man basket the operator must load the basket to 125% of its rated capacity and hold it for

The ASME volume for slings is

When operating a crane on a barge the list chart must be provided by