SWE MAY 2017

  1. __ is mandated for federal organizations by HSPD-20/HSPD-51, FCDs 1 and 2, and the National Continuity Policy Implementation Plan.
    COOP
  2. __ are mandated for federal organizations by FISMA.
    ICSPs
  3. What step of the ICSP includes "exercise and testing schedules"?
    Develop the Continuity Planning Policy Statement
  4. __ defines the maximum amount of time that a system resource can remain unavailable before there is an unacceptable impact on other system resources supported mission/business processes and the MTD.
    RTO (Recovery Time Objective)
  5. ___ Preserves authorized restrictions on information access and disclosure, including means for protecting personal privacy and proprietary information.
    Confidentiality
  6. __ guards against improper information modification or destruction, and includes ensuring information non-repudiation and authenticity.
    Integrity
  7. __ ensures timely and reliable access to and use of information.
    Availability
  8. ___ is the ability to quickly adapt and recover from any known or unknown changes to the enviroment.
    Resilience
  9. To whom does the PIO deliver his recommendation?
    XO
  10. How many types of recommendations can the PIO deliver?
    4
  11. What category do Quality Of Work and Communication fall under on the Evaluation Support Form?
    Performance
  12. What is Automatic Call Distribution (ACD) associated with?
    Call Distribution
  13. What is the acronym for the information recorded by call accounting?
    SMDR
  14. In what CallPilort menu is a mailbox created?
    User
  15. What must be configure before installing the Windows Server 2008 Image?
    BIOS and RAID
  16. What must be done with spare server NICs?
    Disabled
  17. What should you do if a newly built server fails to logon automatically?
    Reboot: logon via localnet-s, logon via .\serversu admin account
  18. On the image 7 build, to what does the build process change the local administrator account?
    Sdc_admin
  19. How long can Category 5e UTP be untwisted for connectorizing?
    13mm (.5)
  20. How do you check connectivity for a SWIII which has just been joined to the network?
    PING
  21. What load is used to configure trunks?
    LD14
  22. What is a phantom DN?
    Virtual phone numbers assigned to phones that only exist in software. Phantom DNs are used in CallPilot software.
  23. In the CS1000e what is assigned to a service to make it both accessible and operational.
    SDN (service directory number)
  24. is a special DN, to which no agents are assigned, created to provided call queuing and routing to CallPilot services
    CDN (control directory number)
  25. What is the domain name for SIPRNET?
    • Ads.uscg.smil.mil
    • uscg.smil.mil
  26. Shore tie mounds have how many fiber outlets for future?
    2
  27. Where can you verify that an imager server installed correctly?
    C:\$flag
  28. What acronym was used to define a deployment with pre-programmed installation wizard responses?
    LTI
  29. What is the naming standard for an SCCM Central Server?
    CMCN
  30. Per the CG ISP Cabling standard, what media is authorized for horizontal cabling?
    Cat5e
  31. After how many days of inactivity will a PU account be deleted?
    90 days
  32. After how many days of inactivity will a PU account be disabled?
    45 days
  33. The length of the cross-connect jumpers and patch cords in the MC or IC should not exceed?
    20 M (66ft)
  34. The length of the cord used to connect telecommunications equipment directly to the MC or IC should not exceed?
    30m (98 ft)
  35. According to TIA/EIA 569 standard, a TC will be located within how many feet of cable from all work areas?
    295 feet or 90 meters
  36. In the CS1000e from the top down, how is a TN identified?
    Loop, Shelf, Card, Unit
  37. What must be done after a server build fails?
    DiskPart
  38. What Cisco IOS service account is used as part of the USCG device hardening posture?
    Cgiascanner
  39. What RAID configuration is being used when a 2nd drives fills up when the 1st drive is full?
    Spanning
  40. In the ORM process, during which step do you as "what if" in order to determine what could go wrong?
    Step 2: Identify Hazards
  41. What cable is used to connect to a Cisco switch console?
    Cisco Rollover cable (RJ45 to Serial)
  42. What command will allow for the enabling of password encryption on all passwords on switch
    service password-encryption
  43. What load is used to configure route tables?
    LD16
  44. What load is used to configure the digital loop?
    LD 17
  45. What load is used to configure the customer data block?
    LD 15
  46. What SCCM operation system deployment method means the computer will be reimaged immediate, even if a user is online?
    MAN (immediate)
  47. On a MS server 2008, to what should the drive label for the CD-ROM be changed?
    X:\
  48. What are the main components to CommVault
    CommServe, MediaAgent, iDataAgent
  49. When restoring large amounts of data from CommVault, what command should be used?
    Robocopy
  50. What is the minimum character length a last name can be truncated to with their permission?
    4
  51. What should be done after server install disk 3 finishes?
    Insert the Boot Disk
  52. What admin account type is only used at TISCOM?
    -DA
  53. What is the default group scope for SG/DG
    Global
  54. What is the maximum amount of characters in the naming convention for workstations in ADUC?
    15
  55. Which fiber strands should be left at length and left as spares on both ends?
    Slate and White
  56. What is Tiscom ENI responsible for?
    Enterprise Networks Infrastructure -LAN, WAN, Cutter Connectivity, Telephony
  57. How many passes are required for an overwrite process to be completed?
    6 passes using 3 different patterns and their inverses
  58. What is required strength for a degausser to be used on DOD hard drives?
    1700 Oersted
  59. At what percentage of their strength should degaussers be run
    Full Magnetic Field Strength
  60. In what position should hard disk platters be during degaussers
    Horizontal
  61. What must be removed from the hard disk if it has very high coercivity ratings?
    Magnetic Platters
  62. Who publishes an evaluation products list for degaussers
    NSA
  63. What is the unit of measure for magnetic coercivity
    Oersted
  64. What are the revalidation requirements for privileged access to CGONE
    • LVL 3-4= Annually
    • LVL 1-2= Biennially
  65. The maximum pulling tension for 4-pair balanced twisted-pair cable shall not exceed
    110 N (25 LBF)
  66. Use optical disk media shredders or to reduce to particles that have a nominal edge dimensions of 0.5 mm and surface area of .25 mm2 or smaller
    Disintegrator
  67. normally applies to the mission/business itself, it concerns the ability to continue critical functions and processes during and after an emergency event?
    Continuity Planning
  68. Who approves request for TAD accounts?
    Commandant CG-651
  69. CAC-exempt access to CGONE is authorized for new civilians employees, new contractors, members of other agencies and summer interns for a period up to ____ days
    30
  70. ___ is the process of replacing information data with meaningless data in such a way that meaningful information cannot be recovered from a hard drive.
    Overwriting
  71. ___ is a procedure that reduces the magnetic flux of a medium to virtual zero by applying a reverse magnetizing field
    Degaussing
  72. Which of the follow is not a main component to Comm Vault
    CommData
  73. What CommVault component is located in each District and all data within the district is backed up to it
    MediaAgent
  74. Per the DISA printer STIG, what protocol must be disabled
    DHCP
  75. Which VLAN should be configured for unused ports on a USCG CISCO 3750 switch
    99
  76. What is an 0-4 in the Marine Corps
    Major
  77. Counseling must take place not later than ___ days following the employee review period ending date
    21
  78. How often must a member in an IAT1 or IAT2 position be recertified
    Biennially
  79. What ombudsman members may be granted access to CGONE
    MCPOCG Spouse, MCPOCG-R Spouse, 3 and 4 star admirals Spouse
  80. What is the Target Timeframe for completion of a new SG or DG
    6 Hours
  81. Horizontal cabling jumpers and cross-connects should not exceed how long within the work are or the telecommunications closet
    16 ft
  82. Total length of horizontal cabling jumpers and cross-connects should not exceed how long
    10 m
  83. The length of the cross-connect jumpers and patch cords in the MC or IC should not exceed
    A and C
  84. What is the maximum number of wall plates used for shipboard FTTD
    Number of wall plates 2, number of cables 2 multi mode, and type of jack (ST)
  85. Which ANSI/TIA Standard prescribes a Star Topology for all distributions?
    568
  86. Where do you find port identifiers for devices on a Microsoft operating system
    Device Manager
  87. For women, the bulk of the hair should not exceed ____ Inches
    2
  88. Micro braids, or multiple braids shall be approximated ____ or less in a diameter
    1/4 inch
  89. What is the maximum size for women's earrings while in uniform?
    Approx 1/8-1/4 inch
  90. What components are available within Microsoft WDS? Server, Cleint, ______
    Management Components
  91. Whose configuration requirements are being followed by TISCOM in the deployment of Network Switches
    DISA
  92. What is the target time frame for a CGONE account deletion?
    48 Hours
  93. How do you verify CGPAAS information in CGBI
    Personal
  94. How dou you run a Unit report in CGBI
    Cubes and Reports
  95. How many sets are in the ORM process
    7
  96. In the GAR model, what is the numerical range for the amber scope? 24----
    24-44
  97. The five basic rules of marksmanship for firing any firearm are: Stance/Position, Grip/Hold, Sigh Alignment/Sight Picture, Breath Control, and ____ Control
    Trigger
  98. In searching for billets while creating an E-Resume, the following three fields need to be filled, Recruitment Type, Business Unit, and
    Job Code
  99. What can be done to mitigate the slow nature of replication when updating objects in ADUC
    Make Changes on closest Domain Controller
Author
dayofdead
ID
355182
Card Set
SWE MAY 2017
Description
Updated