-
__ is mandated for federal organizations by HSPD-20/HSPD-51, FCDs 1 and 2, and the National Continuity Policy Implementation Plan.
COOP
-
__ are mandated for federal organizations by FISMA.
ICSPs
-
What step of the ICSP includes "exercise and testing schedules"?
Develop the Continuity Planning Policy Statement
-
__ defines the maximum amount of time that a system resource can remain unavailable before there is an unacceptable impact on other system resources supported mission/business processes and the MTD.
RTO (Recovery Time Objective)
-
___ Preserves authorized restrictions on information access and disclosure, including means for protecting personal privacy and proprietary information.
Confidentiality
-
__ guards against improper information modification or destruction, and includes ensuring information non-repudiation and authenticity.
Integrity
-
__ ensures timely and reliable access to and use of information.
Availability
-
___ is the ability to quickly adapt and recover from any known or unknown changes to the enviroment.
Resilience
-
To whom does the PIO deliver his recommendation?
XO
-
How many types of recommendations can the PIO deliver?
4
-
What category do Quality Of Work and Communication fall under on the Evaluation Support Form?
Performance
-
What is Automatic Call Distribution (ACD) associated with?
Call Distribution
-
What is the acronym for the information recorded by call accounting?
SMDR
-
In what CallPilort menu is a mailbox created?
User
-
What must be configure before installing the Windows Server 2008 Image?
BIOS and RAID
-
What must be done with spare server NICs?
Disabled
-
What should you do if a newly built server fails to logon automatically?
Reboot: logon via localnet-s, logon via .\serversu admin account
-
On the image 7 build, to what does the build process change the local administrator account?
Sdc_admin
-
How long can Category 5e UTP be untwisted for connectorizing?
13mm (.5)
-
How do you check connectivity for a SWIII which has just been joined to the network?
PING
-
What load is used to configure trunks?
LD14
-
What is a phantom DN?
Virtual phone numbers assigned to phones that only exist in software. Phantom DNs are used in CallPilot software.
-
In the CS1000e what is assigned to a service to make it both accessible and operational.
SDN (service directory number)
-
is a special DN, to which no agents are assigned, created to provided call queuing and routing to CallPilot services
CDN (control directory number)
-
What is the domain name for SIPRNET?
- Ads.uscg.smil.mil
- uscg.smil.mil
-
Shore tie mounds have how many fiber outlets for future?
2
-
Where can you verify that an imager server installed correctly?
C:\$flag
-
What acronym was used to define a deployment with pre-programmed installation wizard responses?
LTI
-
What is the naming standard for an SCCM Central Server?
CMCN
-
Per the CG ISP Cabling standard, what media is authorized for horizontal cabling?
Cat5e
-
After how many days of inactivity will a PU account be deleted?
90 days
-
After how many days of inactivity will a PU account be disabled?
45 days
-
The length of the cross-connect jumpers and patch cords in the MC or IC should not exceed?
20 M (66ft)
-
The length of the cord used to connect telecommunications equipment directly to the MC or IC should not exceed?
30m (98 ft)
-
According to TIA/EIA 569 standard, a TC will be located within how many feet of cable from all work areas?
295 feet or 90 meters
-
In the CS1000e from the top down, how is a TN identified?
Loop, Shelf, Card, Unit
-
What must be done after a server build fails?
DiskPart
-
What Cisco IOS service account is used as part of the USCG device hardening posture?
Cgiascanner
-
What RAID configuration is being used when a 2nd drives fills up when the 1st drive is full?
Spanning
-
In the ORM process, during which step do you as "what if" in order to determine what could go wrong?
Step 2: Identify Hazards
-
What cable is used to connect to a Cisco switch console?
Cisco Rollover cable (RJ45 to Serial)
-
What command will allow for the enabling of password encryption on all passwords on switch
service password-encryption
-
What load is used to configure route tables?
LD16
-
What load is used to configure the digital loop?
LD 17
-
What load is used to configure the customer data block?
LD 15
-
What SCCM operation system deployment method means the computer will be reimaged immediate, even if a user is online?
MAN (immediate)
-
On a MS server 2008, to what should the drive label for the CD-ROM be changed?
X:\
-
What are the main components to CommVault
CommServe, MediaAgent, iDataAgent
-
When restoring large amounts of data from CommVault, what command should be used?
Robocopy
-
What is the minimum character length a last name can be truncated to with their permission?
4
-
What should be done after server install disk 3 finishes?
Insert the Boot Disk
-
What admin account type is only used at TISCOM?
-DA
-
What is the default group scope for SG/DG
Global
-
What is the maximum amount of characters in the naming convention for workstations in ADUC?
15
-
Which fiber strands should be left at length and left as spares on both ends?
Slate and White
-
What is Tiscom ENI responsible for?
Enterprise Networks Infrastructure -LAN, WAN, Cutter Connectivity, Telephony
-
How many passes are required for an overwrite process to be completed?
6 passes using 3 different patterns and their inverses
-
What is required strength for a degausser to be used on DOD hard drives?
1700 Oersted
-
At what percentage of their strength should degaussers be run
Full Magnetic Field Strength
-
In what position should hard disk platters be during degaussers
Horizontal
-
What must be removed from the hard disk if it has very high coercivity ratings?
Magnetic Platters
-
Who publishes an evaluation products list for degaussers
NSA
-
What is the unit of measure for magnetic coercivity
Oersted
-
What are the revalidation requirements for privileged access to CGONE
- LVL 3-4= Annually
- LVL 1-2= Biennially
-
The maximum pulling tension for 4-pair balanced twisted-pair cable shall not exceed
110 N (25 LBF)
-
Use optical disk media shredders or to reduce to particles that have a nominal edge dimensions of 0.5 mm and surface area of .25 mm2 or smaller
Disintegrator
-
normally applies to the mission/business itself, it concerns the ability to continue critical functions and processes during and after an emergency event?
Continuity Planning
-
Who approves request for TAD accounts?
Commandant CG-651
-
CAC-exempt access to CGONE is authorized for new civilians employees, new contractors, members of other agencies and summer interns for a period up to ____ days
30
-
___ is the process of replacing information data with meaningless data in such a way that meaningful information cannot be recovered from a hard drive.
Overwriting
-
___ is a procedure that reduces the magnetic flux of a medium to virtual zero by applying a reverse magnetizing field
Degaussing
-
Which of the follow is not a main component to Comm Vault
CommData
-
What CommVault component is located in each District and all data within the district is backed up to it
MediaAgent
-
Per the DISA printer STIG, what protocol must be disabled
DHCP
-
Which VLAN should be configured for unused ports on a USCG CISCO 3750 switch
99
-
What is an 0-4 in the Marine Corps
Major
-
Counseling must take place not later than ___ days following the employee review period ending date
21
-
How often must a member in an IAT1 or IAT2 position be recertified
Biennially
-
What ombudsman members may be granted access to CGONE
MCPOCG Spouse, MCPOCG-R Spouse, 3 and 4 star admirals Spouse
-
What is the Target Timeframe for completion of a new SG or DG
6 Hours
-
Horizontal cabling jumpers and cross-connects should not exceed how long within the work are or the telecommunications closet
16 ft
-
Total length of horizontal cabling jumpers and cross-connects should not exceed how long
10 m
-
The length of the cross-connect jumpers and patch cords in the MC or IC should not exceed
A and C
-
What is the maximum number of wall plates used for shipboard FTTD
Number of wall plates 2, number of cables 2 multi mode, and type of jack (ST)
-
Which ANSI/TIA Standard prescribes a Star Topology for all distributions?
568
-
Where do you find port identifiers for devices on a Microsoft operating system
Device Manager
-
For women, the bulk of the hair should not exceed ____ Inches
2
-
Micro braids, or multiple braids shall be approximated ____ or less in a diameter
1/4 inch
-
What is the maximum size for women's earrings while in uniform?
Approx 1/8-1/4 inch
-
What components are available within Microsoft WDS? Server, Cleint, ______
Management Components
-
Whose configuration requirements are being followed by TISCOM in the deployment of Network Switches
DISA
-
What is the target time frame for a CGONE account deletion?
48 Hours
-
How do you verify CGPAAS information in CGBI
Personal
-
How dou you run a Unit report in CGBI
Cubes and Reports
-
How many sets are in the ORM process
7
-
In the GAR model, what is the numerical range for the amber scope? 24----
24-44
-
The five basic rules of marksmanship for firing any firearm are: Stance/Position, Grip/Hold, Sigh Alignment/Sight Picture, Breath Control, and ____ Control
Trigger
-
In searching for billets while creating an E-Resume, the following three fields need to be filled, Recruitment Type, Business Unit, and
Job Code
-
What can be done to mitigate the slow nature of replication when updating objects in ADUC
Make Changes on closest Domain Controller
|
|