Home
Flashcards
Preview
Design Quiz 1
Home
Get App
Take Quiz
Create
What is the correct order of the OSI model from bottom to top?
Physical
Data Link
Network
Transport
Session
Presentation
Application
100Base-FX uses which of the following types of cable?
A. Fiber Optic
B. Coax
C. UTP
D. Shielded Twisted Pair
A. Fiber Optic
Which of the following should u check if u can connect using the IP address but not the host name?
A. DNS
B. WINS
C. DHCP
A. DNS
The fastest method of transporting data w/ a switch?
A. cut through
B. loop back
C. store & forward
A. cut through
Which of the following protocols map a logical address to a MAC (Media Access Control) address?
A. ARP
B. WINS
C. DNS
A. ARP
The major limition factor for how long a cable can be in a segment is ___?
A. collisions
B. attenuation
C. EMI
B. attenuation
A bridge filters traffic using which type of address?
A. IP address
B. TCP address
C. MAC address
C. MAC address
Using the TCP/IP protocol if the destination of the packet is outside the subnet then the packet is sent to the ___?
A. switch
B. bridge
C. default gateway
C. default gateway
What is the 1st octet range for a class A IP address?
A. 1-126
B. 1-191
C. 1- 128
A. 1-126
Refers to the part of the network that is separated by routers, bridges, or switches?
A. Segment
B. Node
C. Partition
A. Segment
Data is organized into FRAMES for transmission at this OSI level?
A. Network
B. Data Link
C. Physical
B. Data Link
What routing protocol counts hops to the destination along multiple paths to determine the most efficient route?
A. RIP
B. ARP
C. DLC
A. RIP
Operates at the network layer of the OSI model?
A. Router
B. Gateway
C. Bridge
A. Router
Dial-up protocol that uses a virtual private network (VPN)?
A. PPP (Point to Point Protocol)
B. SLIP (Serial Line Internet Protocol)
C. PPTP (Point-to- Point Tunneling Protocol)
C. PPTP (Point-to- Point Tunneling Protocol)
Network connection devices that is capable of sending packets along multiple paths depending on which path is more efficient?
A. Bridge
B. Router
C. All of the above
B. Router
The easiest protocol to setup?
A. NWLink
B. NetBEUI
C. TCP/IP
B. NetBEUI
Ensures that 1 device is NOT overwhelmed by another w/ a data transmission?
A. CRC
B. Flow control
C. SMB
B. Flow control
Characteristic of the TCP protocol?
A. fast but unreliable delivery
B. assurance of packet delivery
C. best effort delivery
B. assurance of packet delivery
Cable type that offers the LEAST resistance to EMI?
A. Fiber-optic
B. UTP
C. Coaxial
B. UTP
For a Class C IP address the 1st ____ Octect(s) are reserved for the network ID?
A. 1
B. 3
C. 2
B. 3
A set of "RULES" for network transmission?
A. Gateways
B. Protocols
C. Topologies
B. Protocols
Name 2 Protocols in the TCP?IP suite that function at the Transport layer of the OSI model?
A. TCP
B. UDP
C. ARP
D. SNMP
E. IP
A. TCP
C. UDP
IP is responsible for sorting & ____ of packets.
A. Organizing
B. Delivery
C. Addressing
D. Holding
E. Verifying
C. Addressing
What is the 1st octet range for a Class B IP address?
A. 192-223
B. 128-191
C. 128-255
D. 1-127
E. 127-191
B. 128-191
What is the 1st octet range for a Class C IP address?
A. 192-225
B. 1-126
C. 192-223
D. 128-191
E. 192-255
E. 192-255
What method of transporting data w/ a switch is faster?
A. Spanning Tree
B. Store-and-forward
C. Pass-through
D. Routing
E. Cut-though
E. Cut-though
A packet in a TCP/IP network whose destination is outside the local network goes to the ___?
A. IP subnet
B. TCP transceiver
C. default gateway
C. default gateway
1 impt difference between routers & bridges is that when a bridge cant locate the destination address in its table it ______?
A. sends the transmission to the default gateway
B. dumps the packet
C. broadcasts the transmission to all ports
C. broadcasts the transmission to all ports
OSI level that ensures error-free delivery of packets?
A. Transport
B. Network
C. Data Link
A. Transport
The IEEE specification for a token ring network?
A. 802.3
B. 802.6
C. 802.5
C. 802.5
A protocol that functions at the transport layer of the OSI model?
A. IP
B. SPX
C. IPX
C. IPX
How many bits are there in an IP address?
A. 64
B. 128
C. 32
C. 32
An easy to configure, fast, & efficient protocol recommended for sm non-routable networks?
A. TCP/IP
B. X.25
C. NetBEUI
C. NetBEUI
What type of troubleshooting device examines the network at the packet level?
A. TDR
B. VOM
C. Protocol analyzer
A. TDR
Resolves domain names into IP addresses?
A. WINIPCFG
B. DNS
C. DHCP
B. DNS
A crossover cable can be used to connect?
A. A hub to a hub
B. a PC to a PC
C. all of the above
C. all of the above
The RJ-45 connectors used in UTP networks has ______ wires.
A. 2 pairs or 4
B. 6 pairs or 12
C. 4 pairs or 8
C. 4 pairs or 8
Your IP address is 135.72.14.43. What portion if the IP address identifies your network ID?
A, 135
B. 135.72
C. 135.72.14
B. 135.72
A router uses ____ addressing to choose its path?
A. Logical
B. Physical
C. System
A. Logical
Of the 2 types of routers the 1 that uses the discovery process to create its routing table?
A. dynamic
B. multiplexed
C. static
A. dynamic
Author
mom2bmw2
ID
35351
Card Set
Design Quiz 1
Description
Quiz 1
Updated
2010-09-17T17:42:28Z
Home
Flashcards
Preview