-
Before beginning any forcible entry, which reminder phrase should fire fighters keep in mind
Try before you pry
-
Breaching of which type of wall is most likely to result in structural collapse
bearing
-
Duck-billed lock breaker is used to
open a padlock
-
Forcible entry tools are classified by type. What is one of those classifications
Striking
-
For forcible entry , who usually determines the point of entry and method to be used
Company officer
-
How are jalousie windows normally opened and cosed
Turning a small hand-crank
-
How does the rabbet tool work
It spreads the door from the frame
-
How is the length of bolt cutter handles related to he amount of cutting force that can be aplied
The longer the handle , the greater the cutting force
-
How many people are needed to use a battering ram
two to four
-
How much damage is caused by forcing the locks on double-hung windows
extensive
-
The Hux bar is designed primarily for
prying
-
Ideally, when forcible entry is used, what should fire fighters do before leaving the scene
Take steps to secure the building
-
A k tool is used in combination with
a pry bar
-
A silicon carbide composite circular saw blade is designed for use on
masonry
-
Tempered glass is about ___ as strong as regular glass
four times
-
To force an inward-opening door, which part of the halligan bar is inserted between the stop and the jamb
adz
-
Tool failure and possibly injury could result from attempting to cut __ with ordinary cutting tools
case-hardened steel
-
What is one of the three types of wooden swinging doors
panel
-
What is one of the two styles of wooden door frames
Rabbet
-
What is the minimum acceptable level of protective equipment when conducting forcible entry during fire suppression operations
Full structural firefighting PPE
-
What is the quickest way to force entry through a security roll-up door
Cut the door with a torch or saw
-
What is the term for a small opening in which a prying tool can be inserted
bite
-
What is the term for the transparent part of a window
Glazing
-
What is the U-shaped part of a padlock that locks into the padlock body
Shackle
-
What must be done prior to making forcible entry into a fire building
The fire attack team must be ready
-
What should be done after a self-closing door is forced
Chock the door in the open position
-
Where are the hinges placed on the casement window
side
-
Where should a fire fighter stand when breaking windows
Windward side of the window with the hands above the break
-
Which action should fire fighters perform first before forcing the door
Look for a glass panel in or adjacent to the door
-
Which hazard should be of particular concern to fire fighters who are carrying long tools
overhead wires
-
Which kind of steel has been specially treated to resist cutting by normal means
case-hardened
-
Which method should be considered first when forcing an outward-swinging door
Removing the hinge pins
-
Which of the following is a type of door frame
Stopped
-
Which of the following is one of the four major categories of door locks
Cylindrical
-
Which part of a door lock catches and holds the door frame
Latch
-
Which statement about outward-opening doors is correct
These door are designed to facilitate exit
-
Which tool can be used to unscrew a lock cylinder
vise grips
-
Which tool combines an adz, a pick , and a claw
Halligan bar
-
Which tool is a small hydraulic spreader operated by a hand-powered pump
Rabbet tool
-
Which tool is best for breaching a floor
Rotary saw
-
Which tool is designed for both cutting and prying
Pry axe
-
Which tool is designed specifically to cut into a lock cylinder
K tool
-
Which tool is inserted between an older-style latch and the door frame to force the latch back and open the door
Shove Knife
-
Which tool is specifically designed to open double doors equipped with panic bars
J tools
-
Which tools is part of the "irons"
Flat-head axe / Halligan bar
-
Which type of circular saw blade is specially designed to cut through hard surfaces or wood
carbide-tipped
-
Which circular saw blade is susceptible to damage from gasoline vapors
Masonry
-
Which type of cutting blade can be damage by gasoline vapors
Metal
-
Which type of door is typically used for entrance doors
Solid-core
-
Which type of glass is normally used in automobile side and rear windows
tempered
-
Which type of glass is normally used in automobile windshields
Laminated
-
Which type of glass is used in most sliding doors
Tempered
-
Which type of tool is a pick-head axe
cutting
-
Which type of tool is used to apply an impact force directly on another tool or object
Striking
-
Which type of window is made of overlapping sections of tempered glass in a metal frame
Jalousie
|
|