ILARTS

  1. WHAT IS THE PRIMARY PURPOSE OF THE ILARTS CONSOLE?
    TO RECORD AIRCRAFT LAUNCH AND RECOVERIES
  2. WHO ARE THE ONLY PERSONNEL ALLOWED IN ILARTS DURING AN EMERGENCY?
    • VLA PERSONNEL
    • AIR/MINI BOSS
    • MAINT OFFICER/CHIEF
  3. WHAT ARE THE TAPES IN ILARTS CLASSIFIED AS DURING AN EMERGNENCY?
    SECRET
  4. WHO MUST GIVE APPROVAL TO MAKE COPIES OF THE ILARTS TAPES?
    MAINT OFFICER/CHIEF
  5. WHAT ARE THE 10 COMPONENTS IN RACK 1?
    • VIDEO INVERTER
    • PRIMARY SYNC GENERATOR
    • SEC SYNC GENERATOR
    • AUTO CHANGEOVER SWITCH
    • ACCESS TERMINAL
    • QUAD VIEW COMPUTER
    • SPOT 7 DVR
    • NETWORK ROUTER
    • DATA GENERATOR
    • ELECTRONIC CROSSHAIR STABILIZATION
  6. WHAT DOES THE VIDEO INVERTER DO?
    REVERTS THE CENTERLINE CAMERA FEED BACK TO NORMAL AFTER HITTING THE MIRROR ASSEMBLY
  7. WHAT DOES THE PRIMARY SYNC GENERATOR DO?
    KEEPS VIDEO IN SYNC AND PREVENTS VERTICAL TEAR/HORIZONTAL ROLL
  8. WHAT DOES THE AUTO CHANGEOVER SWITCH DO?
    SWITCHES SYNC GENERATORS AUTOMATICALLY DURING A FAULT
  9. WHAT DOES THE SECONDARY SYNC GENERATOR DO?
    BACKUP FOR PRIMARY SYNC GENERATOR
  10. WHAT DOES THE ACCESS TERMINAL DO?
    USED SO THE KVM AND QUAD VIEW/SPOT 7 COMPUTER CAN INTERACT
  11. WHAT DOES THE QUAD VIEW COMPUTER DO?
    PROVIDES POWER INPUTS FOR THE QUAD VIEW SCREEN
  12. WHAT DOES THE SPOT 7 DVR DO?
    USED TO RECORDS SPOT 7 VIDEO FEED
  13. WHAT DOES THE NETWORK ROUTER DO?
    DISTRIBUTES THE FIBER/rg45 CABLE NETWORK WITHIN THE ILARTS CONSOLE
  14. WHAT DOES THE DATA GENERATOR DO?
    RECEIVES VARIOUS INPUTS FROM OUTSIDE ILARTS AND ADDS THE INFORMATION ON TOP OF RAW VIDEO
  15. WHAT ARE SOME OF THE INPUTS THE DATA GENERATOR RECEIVES?
    • IFLOLS
    • MOVLAS
    • MORIAH
    • SPN-46
  16. WHAT DOES THE ECSS DO?
    ADDS THE CROSSHAIRDS TO THE CENTERLINE CAMERA FEEDS
  17. WHAT DOES ECSS STAND FOR?
    ELECTRONIC CROSSHAIR STABILIZATION SYSTEM
  18. WHAT ARE THE 9 COMPONENTS IN RACK 2?
    • VIDEO SWITCHER 1
    • 2 WAVEFORM MONITORS
    • 2 PREVIEW MONITORS
    • VIDEO SWITCHER 2
    • 4 DVRS/VTRS
    • VCR/DVD BURNER
    • KVM
    • VIDEO ROUTER
    • VIDEO DISTRIBUTION AMPS
  19. WHAT DOES THE VIDEO SWITCHER 1 IN RACK 2 DO?
    CONTROLS THE VIDEO SENT TO THE LEFT PREVIEW MONITOR
  20. WHAT DO THE 2 WAVEFORMS MONITORS IN RACK 2 DO?
    DISPLAYS RAW VIDEO DATA USED FOR MAINTENANCE
  21. WHAT DO THE 2 PREVIEW MONITORS IN RACK 2 DO?
    WIRED TO THE WAVEFORM MINITORS TO ASSIST IN TROUBLESHOOTING
  22. WHAT DOES THE VIDEO SWITCHER 2 IN RACK 2 DO?
    CONTROLS THE VIDEO SENT TO THE RIGHT PREVIEW MONITOR
  23. WHAT DO THE 4 DVRS/VTRS DO?
    PRIMARY MEANS OF RECORDING ILARTS VIDEO FEEDS
  24. WHAT MODE SHOULD THE VTRS BE PLACED IN, IN ORDER TO OPERATE LOCALLY?
    LOCAL
  25. WHAT MODE SHOULD THE VTRS BE PLACED IN, IN ORDER TO OPERATOR REMOTELY?
    REMOTE
  26. WHAT DOES THE VCR/DVD BURNER DO?
    USED TO CREATE DVD COPIES FROM THE DVR
  27. WHAT DOES KVM DO?
    USED TO RECORD SPOT 7 FEEDS AND ADJUST CENTERLINE CAMERAS
  28. WHAT DOES THE VIDEO ROUTER DO?
    DISTRIBUTES VIDEO FEEDS WITHIN THE CONSOLE
  29. WHAT DOES THE VIDEO DISTRIBUTION AMPLIFIER DO?
    BOOST VIDEO SIGNALS TO BE DISTRIBUTED
  30. WHAT ARE THE 5 COMPONENTS OF RACK 3?
    • QUAD VIEW MONITOR
    • SPOT 7 CAMERA CONTROLS
    • 4 SIX INCH MONITORS
    • SPOT 7 FUSES AND POWER SWITCHES
    • AUDIO PATCH PANEL
  31. WHAT IS THE PURPOSE OF THE QUAD VIEW MONITORS?
    LARGE SCREEN FOR DISPLAYING VIDEO FEED
  32. WHAT IS THE QUAD VIEW MONITOR PLUGGED INTO AND WHY?
    • CVIS "SECURE TV"
    • TO SEND TO OUTSIDE LOCATIONS SUCH AS CDC, SSES AND CATCC
  33. WHAT IS THE PURPOSE OF THE 4 SIX INCH MONITORS IN RACK 3?
    DEDICATED FEEDS FOR SPOT 7 CAMERAS
  34. WHAT IS THE PURPOSE OF SPOT 7 FUSES AND POWER SWITCHES?
    TURN ON MONITORS AND SPOT 7 CAMERAS
  35. WHAT IS THE PURPOSE OF THE AUDIO PATCH PANEL?
    RELAYS THE SATCC RADIO COMMS FROM THE LSO PLATFORM
  36. WHAT ARE THE 5 COMPONENTS FOR RACK 4?
    • 10 SIX INCH MONITORS
    • DVR REMOTE CONTROLLERS
    • CENTERLINE, DECK EDGE AND ISLAND FUSES, POWER AND IR CONTROLS
    • DECK EDGE CAMERA CONTROLS
    • VIDEO SWITCHER
  37. WHAT IS THE PURPOSE OF THE 4 SIX INCH MONITORS IN RACK 4?
    DISPLAYS RECORDING OF VTRS 1-4
  38. WHAT IS THE PURPOSE OF THE DVR REMOTE CONTROLLERS?
    ALLOWS YOU TO OPERATRE THE DVRS IN RACK 2 VIA REMOTE CONTROL FROM RACK 4
  39. WHAT IS THE PURPOSE OF THE CENTERLINE, DECK EDGE AND ISLAND FUSES, POWER, AND IR CONTROLS?
    TURN ON AND MONITOR THE CAMERAS
  40. WHAT IS THE PURPOSE OF THE DECK EDGE CAMERA CONTROLS?
    ADJUST MOVEMENT, ZOOM, FOCUS AND IRIS SETTINGS FOR DECK EDGE CAMERAS
  41. WHAT IS THE PURPOSE OF THE VIDEO SWITCHER IN RACK 4?
    PRIMARY WAY OF ROUTING VIDEO INPUTS AND OUTPUTS
  42. WHAT ARE THE 4 COMPONENTS IN RACK 5?
    • SITE DISTRIBUTION HUB
    • 2 PREVIEW MONITORS
    • 3 SIX INCH MONITORS
    • VIDEO SWITCHER
  43. WHAT IS THE PURPOSE OF THE SITE DISTRIBUTION HUB?
    SEND DESIGNATED ILARTS FEED TO SITE TV
  44. WHAT IS THE PURPOSE OF THE 2 PREVIEW MONITORS IN RACK 5?
    HARDWIRED INTO THE SITE DISTRIBUTION HUB. DISPLAYS SEND OUT TO LSO AND SITE
  45. WHAT IS THE PURPOSE OF THE 3 SIX INCH MONITORS IN RACK 5?
    HARDWIRED TO DISPLAY CENTERLINE CAMERA FEEDS
  46. WHAT IS THE PURPOSE OF THE VIDEO SWITCHER IN RACK 5?
    SECONDARY VIDEO SWITCHER IN CASE PRIMARY FAILS
  47. WHAT IS THE FIRST THING YOU MUST DO IN CASE OF AN EMERGENCY ON THE FLIGHT DECK?
    KILL SITE TV FEED BY UNPLUGGING BNC CONNECTION
  48. WHAT FEEDS ARE USED IN ORDER DURING A RECOVERY?
    • FIRST CENTERLINE UNTIL LANDING GEAR OF AIRCRAFT PASSES FIELD OF VIEW ON CAMERA
    • SECOND ILAND CAMERA
  49. DURING LAUNCH ON THE BOW WHEN DO YOU ZOOM IN ON AIRCRAFT LAUNCHING?
    WHEN THE ABE IS HOOKING THE JET UP
  50. HOW LONG DO DVR TAPES RECORD FOR?
    3 HOURS
  51. HOW LONG DO VCR TAPES RECORD FOR?
    2 HOURS
  52. WHEN DO YOU REPLACE TAPES?
    WHEN YOU HAVE 15 MINUTES LEFT IN RECORDING
  53. WHICH CAMERAS ARE USED TO RECORD HOOK UPS ON THE WAIST?
    ISLAND CAMERA
  54. DURING RECOVERY ON SPOT 7 WHAT DO YOU DISPLAY ON RACK 5?
    SPOT 7 RECOVERY CAMERA
  55. WHO IS THE ONLY PERSON ALLOWED TO CHANGE ORDER OF OPERATION/VIDEO OUTPUT OF ILARTS?
    AIR BOSS
  56. WHAT IS THE CKT DESIGNATION FOR ILARTS CAMERA FEEDS?
    8TV
  57. WHAT IS THE CKT DESIGNATION FOR SITE TV FEEDS?
    14TV
  58. WHO MUST APPROVE DEDICATED FEEDS TO OUTSIDE SOURCES?
    MAINTENANCE OFFICE
  59. CAN IR LIGHTS IMPAIR VISION OF HELO PILOTS DURING NIGHT OPS?
    YES, TURN THEM OFF
  60. WHERE IS VLA POWER DISTRIBUTED FROM?
    LOAD CENTER 53
  61. WHAT FEEDS DOES SPN-46 PROVIDE ILARTS FOR NIGHT TIME?
    • AIRCRAFT SPEED
    • DISTANCE FROM SHIP
    • RATE OF DESCENT
  62. HOW MANY PERSONNEL ARE REQUIRED TO CLEAN CENTERLINE CAMERAS?
    • 2
    • 1 TO CLEAN THE CAMERA
    • OTHER THE FACE AFT AND FOUL THE DECK
  63. WHAT CALL IS MADE OVER THE 5MC TO CLEAN THE CAMERAS BY AIR BOSS?
    "NOW CLEAN THE CENTERLINE CAMERAS"
  64. WHAT COLOR MUST THE GENERATED DATA BE FOR DAY TIME?
    BLACK
  65. WHAT COLOR MUST THE GENERATED DATA BE FOR NIGHT TIME?
    WHITE
  66. WHAT ARE THE 10 ILARTS CAMERAS?
    • BOW PORT
    • BOW STBD
    • WAIST
    • AFT CENTERLINE
    • FWD CENTERLINE
    • ISLAND CAMERA
    • SPOT 7 RECOVERY
    • SPOT 7 CATWALK
    • SPOT 7 DAY
    • SPOT 7 NIGHT
Author
Coreyk58
ID
352584
Card Set
ILARTS
Description
Updated