1. Home
  2. Flashcards
  3. Preview

SPE 7/11/19 Day 1

    • 1.pump
    • 2.Gas Handler
    • 3. ESP gauge
    • 4. Protector
    • 5. Motor
    • 1. Core
    • 2. Casting
    • 3. Machined

  3. Top, bottom, middle
    • 1. Drag
    • 2. Cope
    • 3. Core
  4. Diffused vanes

  5. What do these add?
    • 1. makes smoother
    • 2. heat resistant
  6. shroud removed
  7. Vane inserts
  8. Core tooling

  9. what are nozels?
    burners
  10. automated tray removal
  11. assembled cores
  12. Vane inserts
  13. automated vane inserts
  14. auto clean and dip
  15. curing oven
  16. impeller cores
  17. assembled cores
  18. pouring
  19. cope and core (double)
  20. loading cores
  21. pattern plate
  22. waiting to be poured
  23. Pulling gas out of cold core
  24. pattern plates in tool room
  25. finished esps
  26. Protectors (chambers)
  27. rotor bearing
  28. terminal block
  29. metal bellow
  30. straightener
  31. storage carousel
  32. changes chuck sides
  33. 60 ton press, lams into housing
  34. pins and 2 phases done
  35. heating for epoxy
  36. putting on motor leads
  37. EDB
    Economic Development Board
  38. CI Champ
    Jason
  39. ME in stages (from Re-think)
    Ribhav
  40. Most common flow
    mixed
  41. Common core setup
    • Top
    • Vein
    • Bottom
  42. S8000 means
    8000 bpd
  43. Cold Core (3)
    • 1. Binders
    • 2. More accurate
    • 3. Cures with gas
  44. 3 steps to stage
    • 1. Tooling
    • 2. Core.
    • 3. Stage
  45. How long is life of tooling?
    40,000 runs
  46. SWTC
    Singapore Well Testing Center
  47. PPCS
    Pressure Pumping and Chemical Singapore (coiled tubing/cement)
  48. Man hours/stator
    40
  49. Government agency helping develop automation
    Simtech
  50. Girl from Rethink
    Minjin
  51. # of slots
    18
  52. 3 types of protectors
    • 1. bag
    • 2. metal bellows
    • 3. labyrinth
  53. VGSA
    Vortex Gas Separator Assembly
Author
Jared023
ID
347863
Card Set
SPE 7/11/19 Day 1
Description
SPE
Updated

  1. Home
  2. Flashcards
  3. Preview