1. Home
  2. Flashcards
  3. Preview

009

  1. Three angle of any down conductor shall not be less than?
    Not less than 90 degrees with a bend radius not less than 8"
  2. Typical peak current of a lightning strike?
    20 KA
  3. Minimum resistance between equipment conductive case and each power cord conductor prong.
    1 Megaohm
  4. What should the resistance be from a workbench to a ship's hull?
    0.1 ohms
  5. Personal safety grounds max resistance?
    Contact resistance of 0.1 ohms or less between equipment housing and ground.
  6. Minimum diameter of ground rods?
    • 1.9 cm
    • 3/4 inch diameter
  7. For lightning protection what is the maximum distance ground rods can be spaced?
    No more than 50 feet
  8. Maximum resistance between an equipment conductive case and power cord ground prong.
    0.1 Ohms Maximum
  9. Resistance reading from tip of a hot soldering iron to common point ground shall not exceed
    5 ohms
  10. Form number for PFT?
    jQuery11240911322292834545_1556205544535?
  11. What are the minutes for high moderate low
    75, 150, 500
  12. How many days weight versus cardio
    2 days weight traing 3 days cardio
  13. Female purse color
    Black or brown
  14. Purse color if carried in hand?
    Any color
  15. How shall ground rods be interconnected?
    1/0 AWG bare copper cable
  16. Priority (P) precedence
    Speed of service is 3 hours or less
  17. Earrings
    1/8 to 1/4 Silver pearl gold or white diamond
  18. What fund code funds dry/dockside availabilities?
    AFC-42
  19. What code is for repairable items?
    0C
  20. What is the default transmission power of the Furuno Network Sounder?
    600w, set dip switch #1 to on for 1 kw
  21. What is the optimum output level for a receiver sensitivity test on a direction finder?
    Optimum output level is less than 5uv microvolts
  22. What depth sounder settings gives a low resolution with a wide beam angle?
    Low frequency
  23. What depth sounder setting has a narrow beam angle and gives a high resolution?
    High frequency
  24. PG-500 lights for 5 degree correction?
    All lights off
  25. What is the output level of a UHF XTL-5000 at high power?
    20-25 watts
  26. DF status LED is illuminated indicates?
    Reliable bearing is available
  27. When would you know that the PG-500 has completed its calibration/deviation checks?
    All LEDS will blink twice
  28. What is the output power level of a UHF XTL-5000 transceiver at low power?
    10 watts
  29. Fastest ALE LQA sounding?
    Sounding (one-way)
  30. What effect would silicone cleaners have on rubber matting?
    It will create an insulative film on matting surface.
  31. When shall fall arrest system be used?
    Heights greater than 6 feet
  32. What type of maintenance is 2M/MTR?
    Navy progressive maintenance
  33. Who is responsible to ensure audits of tag-out logs are conducted?
    The cognizant department
  34. 4 step process to rescue a shock victim
    1 scene safety + notification

    2 secure power

    3 evaluate the area

    4 evaluate the victim
  35. How long are inactive record sheets retained?
    6 months
  36. Distance for eyewash stations
    No more than 10 seconds to reach and no more than 10 feet in a straight line when using corrosive materials.
  37. When can compressed air be used for cleaning purposes?
    Where it is reduced to less than 30 psi
  38. Out of commission label
    Red label used to identify instruments that will not correctly indicate readings
  39. 4th step pf ORM?
    Identify options
  40. Standard for safety hard hats?
    ANZI Z89.1
  41. What would a PDC code "2,3,4" indicate on a RPQ?
    member may access references for questions based on this RPQ while taking the RAT
  42. What does the color orange indicate on a CGBI report?
    Non-compliant Not currently correctable
  43. Training code 4
    Job aid
  44. Training code 3
    Job aid w/ introductory training
  45. Discovery of fire A.C.E. elements
    A- sound alarm

    C- contain the fire

    E- Extinguish
  46. What is the 6th step of ORM
    Execute decision
  47. Training code 1
    Train to memory
  48. Who can be an approving official?
    Must be CG officer, OIC E-7 or above or CG civilian who is the official supervisor of the marking official.
  49. Training code 2
    Job aid w/ extensive training
  50. What is an SSIC?
    Standard Subject Identication Code
  51. What would a green label on rubber gloves indicate?
    26500 volts maximum
  52. Sizes of PKP?
    18 and 27 lbs
Author
ccliff23
ID
346697
Card Set
009
Description
gs
Updated

  1. Home
  2. Flashcards
  3. Preview