Switch 1 Admin

  1. Step 1
    Switch>enable
  2. Step 2 (enables global-config mode)
    Switch#config t
  3. Step 3 (sets the hostname to the underlined portion)
    Switch(config)#hostname Switch1
  4. Step 4 (Message displayed)
    Switch1(config)#banner motd * *
  5. Step 5 (Making password available)
    Switch1 (config)#enable password cisco
  6. Step 6(enables special config mode to configure console)
    Switch1 (config)#line console 0
  7. Step 7 (where cisco is the given console password)
    Switch1 (config-line)#password cisco
  8. Step 8 (tells the switch to ask for password)
    Switch1config-line)#login
  9. Step 9 (disables your connection from timing out)
    Switch1 (config-line)#exec-timeout 0 0
  10. Step 10 (Stops console messages from interfering)
    Switch1 (config-line)#logging synchronous
  11. Step 11 (drops out of special config mode)
    Switch1 (config-line)#exit
  12. Step 12 (phone line)
    Switch1 (config)#line vty 0 15 (16 total VTY “lines”, 0 through 15)
  13. Step 13 (Phone line key)
    Switch1 config-line)#password cisco
  14. Step 14
    Switch1 (config-line)#login
  15. Step 15 (drops out of line config mode)
    Switch1 (config-line)#exit
Author
Luimi
ID
343957
Card Set
Switch 1 Admin
Description
Configuring the Switch
Updated