-
What are the 4 levels of casrep precedence and what do they mean?
- Routine/R Assigned to all messages justify transmission but are not sufficiently urgent for higher precedence. Speed of service is 6 hours or less
- Priority/P Assigned to record messages concerning the conduct of operations in progress and for other important and urgent matters when
- routine precedence does not suffice. Speed of service objective is 3 hours
- or less.
- Immediate/O Assigned to record messages relating to situations which
- gravely affect the national forces or populace and which require immediate
- delivery to addressees. Speed of service objective is 30 minutes or less.
- Flash/Z Initial enemy contactReserved for initial enemy contact reports or operational combat messages of extreme urgency; also tropical storms, typhoons, tsunamis, earthquakes, or hurricanes believed to be previously undetected.
- Speed of service objective is less than 10 minutes.
-
What are the 4 types of casreps?
Initial, Update, Cancel, Correct
-
A unit must send out an initial casrep out within ______ hours when a piece of equipment.
Reduces a units ability to complete a mission, not fixed in 48 hours, requires outside assistance to correct.
-
How often must a casrep be updated?
Every 30 days.
-
What is the number range for casrep message serial number?
001-999
-
What are the five types of assistance available in the assistance field in a casrep?
None, depot, technical, tender and other
-
In Almis ______ on the maintenance record indicates a closed discrepancy.
Green C
-
In Almis ______ on the maintenance record indicates carried forward.
CF
-
In Almis ______ on the maintenance record indicates an parts pending.
PP
-
In Almis ______ on the maintenance record indicates a grounding/disabled discrepancy.
Red X
-
In Almis ______ on the maintenance record indicates a mission related discrepancy for boat assets.
Picture of small boat
-
In Almis ______ on the maintenance record in the discrep status column
indicates an deferred maintenance discrepancy over 30 days old that
requires extension by EO or when it is in the maintenance record,
indicates action is required.
Red !
-
In Almis ______ on the maintenance record indicates a completed task.
Blue check mark
-
In Almis ______ on the maintenance record indicates the asset is in bravo status.
Upward green triangle
-
In Almis ______ on the maintenance record indicates the asset is not in bravo status. Status may be NMCM, NMCS, or NMCD
Downward red triangle
-
In Almis ______ on the maintenance record indicates the asset condition is not disabled.
Upward green arrow
-
In Almis ______ on the maintenance record indicates the asset condition is disabled.
Downward red arrow
-
In Almis ______ on the maintenance record, indicates dock chock is required.
Pink rectangle with DC on it or also with black diagonal stripes
-
In Almis ______ on the maintenance record, indicates dock chock had been completed.
Pink rectangle with DC w/checkmark also with black diagonal stripes
-
In Almis ______ on the maintenance record, indicates underway test results are satisfactory.
Pink rectangle with TF w/checkmark also with black diagonal stripes
-
FORCECOM, Performance, Training and Education Branch is what number?
FC-51
-
What is a synchro used for?
Primarily for the rapid and accurate transmission of information between equipment and stations.
-
What types of wire insulation are there?
Rubber, varnished cloth, fluorinated ethylene propylene (FEP), Silicon rubber, or extruded polytetrafluoroethylene.
-
Calculate the diameter in MILS of a conductor that has a diameter of 0.375 inch.
375 mils
-
Define specific resistance.
The resistance of a volume of a substance.
-
List the 4 factors you should use to select wire for a specific current rating.
Conductor size, the material it is made of the location of the wire in a circuit, and the type of insulation used.
-
What are 3 types of nonmetallic insulating materials that can be used in high-temperature environments?
FEP, extruded polytetrafluoroethylene, and silicone rubber
-
What is the best conductor? What is often used instead?
Silver, copper and aluminum.
-
If the casualty causes a loss/degradation of a secondary mission what is the casualty category?
Category 2
-
If the casualty causes a degradation of a primary mission or loss of a secondary mission what is the casualty category?
Category 3
-
If the casualty causes a total loss of a primary mission what is the casualty category?
Category 4
-
Submit a Casrep within __ hours of discovery of an equipment or system deficiency that cannot be repaired within 48 hours.
24
-
How many casreps per message?
1
-
Are special characters like @ permitted in a casrep?
No only upper case letters are permitted ie JOHN.SMITH(AT)USCG.MIL
-
What category of CASREP does the Coast Guard not use?
1
-
What category CASREP?
-A deficiency in mission essential equipment that causes a partial
degradation in any primary mission, or a major degradation or complete loss
of a secondary mission.
. Mission execution is degraded through incapacity to complete certain mission essential tasks, but cutter remains nearly fully mission capable.
. A minor mission degradation such as equipment, machinery, and systems
operating under reduced capacity or redundancy.
Category 2
-
What category CASREP?
. A major degradation in the current primary mission.
. Major impacts include complete loss of equipment, systems, or machinery
functions that significantly reduce mission effectiveness through incapacity to complete several mission essential tasks, but cutter remains partially
mission capable.
Category 3
-
What category CASREP?
Total loss of one current mission and unable to operate as directed by tactical control (TACON) and/or significant risk to cutter/crew survivability, which outweighs the gain in mission execution.
Category 4
-
Primary and secondary missions vary across OPAREA. Consider SAR and MSRO as _____________ missions regardless of OPAREA.
Primary
-
Casrep messages must be sent:
Within 24 hours after discovering an equipment malfunction or defeciency that cannot be repaired within 48 hours
To report a change to equipment condition
To report a successful post-repair operational test
-
Deployed units assign priority (P) precedence to Category _ and _ CASREPs,
and immediate (O) precedence to Category _ CASREPs.
2 and 3.
4
-
CAREPs DTG is layed out by:
12 char. 2 char day 4 char time Z 3 char Month 2 char year
-
If the EIC Equipment Identication Code is unknown then use:
UNKN or 9999
-
Only use the field marker (_) to separate data fields in a CASREPS.
/
-
In AMPN data set in a CASREP how many continuous lines can you have?
10
-
What is the max ohms for a soldering iron
5
-
Minimum diameter for an air terminal
.5 inch
-
How should antenna feedlines be shaped to discourage lightning from traveling into XMTR Building?
Antenna feedlines should have a "Vertical Z" shaped bend.
-
How often are portable tools tested onboard ships?
Quarterly
Visually inspected prior to each use
-
Gauge for ground bus of electrically safe work benches?
|
|
