MCP 70-741 Chapter 6: Implement an Advanced Network Infrastructure

  1. You are configuring NIC teaming. You have chosen to implement Static teaming as the teaming mode. What is your next step?
    Static teaming requires that your Ethernet switches must be configured for NIC teaming per the 802.3ad standard.
  2. When you are configuring SET in a test network, you can only use one Teaming mode. What is it?
    Switch independent mode is the only supported teaming mode in SET.
  3. You try to enable RSS in a virtual machine running Windows Server. You are unable to do so. What could the possible reason(s) be?
    In order to enable RSS on a virtual machine, your network adapters must support the VMQ feature.
  4. You decide to implement QoS over DCB. What are the high-level steps that you must complete?
    • The high-level steps are:
    • A. Enable DCB on your physical switches
    • B. Create QoS rules
    • C. Install the DCB feature on your server(s)
    • D. Define the traffic classes
    • E. Enable the DCB settings
    • F. Enable DCB on your network adapters
  5. What Windows PowerShell cmdlet can you use to enable RDMA on your server’s network adapter?
    You can enable RDMA on your network adapter, assuming they are RDMA-capable, by using the Windows PowerShell Enable-NetAdapterRdma cmdlet.
  6. What is the main purpose of using network virtualization?
    You can use network virtualization to manage network traffic by creating multiple virtual networks, logically isolated, on the same physical network.
Card Set
MCP 70-741 Chapter 6: Implement an Advanced Network Infrastructure
Networking with Windows Server 2016, from Chapter 6