-
Who responds to any inspection results that require corrective action?
The owner/user.
Reference 1.1.2
-
Who decides if API exempted vessels are to be included in the inspection program?
The owner/user
Reference 1.2.2
-
Who holds the overall responsibility of complying with API 510?
The Owner/user
Reference 4.1.1
-
Who is responsible to develop a QA Inspection/Repair Management system?
The owner/user
Reference 4.1.2
-
Who is required to take a Jaeger J-1 eye test?
The inspector.
Reference 4.1.2
-
Who is responsible to develop an effective MOC process?
The owner/user.
Reference 4.1.3
-
Who is responsible to develop a program for Integrity Operating Windows?
The owner/user
Reference 4.1.4
-
During repairs and alterations, who is responsible for quality control?
The repair organization
Reference 4.3
-
Who is responsible to assure the owner that the testing, inspection, repairs, and examinations (TIRE) meet code?
The inspector
Reference 4.4
-
Who is directly involved in inspection activities?
The inspector
Reference 4.4
-
Who evaluates and accepts NDE examination results?
The inspector
Reference 4.4
-
Who makes recommendations for repairs, replacements, or fitness for continued service?
The inspector
Reference 4.4
-
Who performs NDE in accordance with specs?
The NDE Examiner
Reference 4.5.1
-
Who determines the qualification requirements for persons performing NDE?
The owner/user
Reference 4.5.2
-
Who maintains the NDE examiner's certification records?
The Techs employer
Reference 4.5.3
-
Who notifies the inspector or engineers of vessel integrity issues?
All others
Reference 4.6
-
Who establishes a tracking system for inspection audit findings?
The owner
-
Who develops the inspection plan for vessel and relief devices?
The Inspector AND/OR engineer
-
Who chooses to conduct RBI assessments?
The owner
-
Who reviews prior vessel history prior to inspections?
The inspector
-
Who needs to familiarize themselves with characteristics and causes of potential damage mechanisms?
The inspector
-
Who approves deviations from an inspection plan?
The Inspector OR engineer
-
Who performs the internal inspection?
The inspector
-
Who can assist with the internal inspection?
Qualified other
-
Who determines if it's necessary to remove deposits or linings?
The inspector AND corrosion specialist
-
Who performs on-stream inspections?
The Inspector OR NDE examiner
-
Who must approve on-stream inspection work performed by examiners?
The inspector
-
Who specifies the training requirements for non-AI's (inspectors) who perform external inspections?
The owner/user
-
Who accepts non-inspectors to perform externals?
The inspector
-
Who notifies the inspector of any vessel deterioration found?
All others
-
Who performs external inspections?
The inspector OR qualified others
-
Who takes thickness measurements?
The inspector OR NDE examiner
-
Who reviews corrosion data for possible anomalies?
The INspector
-
Who reviews corrosion data if short-term corrosion rates vary significantly?
The inspector AND corrosion specialist
-
Who assures those taking thickness measurements are trained and qualified?
The owner
-
Who must be aware of CUI suspect areas? And that CUI is unpredictable?
The inspector
-
Who must be aware CUI can be localized and doing UT's during internals may be unsuccessful?
The inspector
-
Who determines locations of CMLs for vessels with localized corrosion?
The corrosion specialist
-
Who gets involved if the number of CMLs will be significantly reduced or eliminated?
The corrosion specialist
-
Who determines the type of expected damage and selects an NDE method?
The inspector and Corrosion specialist OR engineer
-
Who specifies when qualified UT angle beam examiners are needed?
Owner
-
Who should be aware of sources of measurement inaccuracies during NDE?
The inspector and NDE examiner
-
Who reviews the use of a component pressure test in lieu of complete vessel hydro?
The engineer
-
Who determines the pressure for tightness test?
Owner
-
Who verifies the water quality and that the vessel is drained and dried before/after a hydro of 300 SS?
The inspector
-
Who reviews the potential risks of a pneumatic pressure test?
The engineer
-
Who develops pneumatic pressure test procedures?
The engineer
-
Who approves substituting NDE for a pressure test after alteration or major repair?
The Inspector AND engineer
-
Who determines if a pressure test is needed after a non-major repair?
The inspector
-
Who verifies new materials for repairs and alterations comply with those specified?
The inspector
-
Who PMIs new materials during repairs and alterations?
The inspector OR NDE examiners
-
Who determines the sampling percentage when verifying new materials?
The inspector OR owner
-
Who selects the amount of additional PMI to do when wrong material is found in existing vessel?
The inspector
-
Who assesses preferential corrosion in welds?
The inspector
-
Who assess's crack like flaws and environmental cracking?
The engineer OR corrosion specialist
-
Who inspects new vessels at the time of installation?
The inspector
-
When the vessel owner and location change, who checks to see if adequate documentation is provided?
The inspector
-
Who determines the external inspection interval?
The inspector OR engineer
-
Every 10 years, who reviews and approves the RBI assessments with intervals beyond 10 years?
The inspector AND engineer
-
Who determines the external inspection requirements for retired by in place equipment?
The owner/user
-
Who determines the internal/on-stream inspection interval?
The Inspector OR engineer
-
Who approves the use of on-stream inspection in lieu of internal?
The inspector
-
Who maintains a fully documented QA process
The PRD repair organization
-
Who maintains a fully documented training program?
The PRD repair organization
-
Who determines the relief device interval?
The Inspector OR engineer
-
Who approvals the deferral of inspection tasks?
The Inspector AND owner
-
Who is able to defer relief device interval lesser 10% or 6 months without other approvals?
The inspector
-
Who approves the deferral of inspection repair recommendations?
The inspector AND inspection supervisor
-
Who changes or deletes inspection recommendations?
The Engineer OR inspection supervisor
-
Who selects which corrosion rate (short vs long) reflects the current conditions?
The inspector
-
Who selects which corrosion rate (short vs long) reflects the current conditions?
The Inspector and Corrosion specialist
-
Who estimates the corrosion rate for a new vessel or vessel with change of service?
Corrosion specialist
-
Who approves the thickness measuring procedure for readings for MAWP calc?
The inspector
-
Who uses Sect VIII Div 2 evaluation for pitting or LTAs?
The engineer
-
Who considers increasing the vessel required thickness for high consequence services?
The engineer
-
Who maintains vessel and relief device records?
Owner
-
Who has access to operating and maintenance records that affect vessel integrity?
The inspector
-
Who prepares equipment repair plans?
The inspector OR engineer
-
Who authorizes all equipment repairs? (Excluding Sect VIII Div 2)
The inspector
-
Who authorizes all repairs to Sect VIII div 2 vessels?
The Inspector AND engineer
-
Who authorizes alterations?
The inspector AND engineer
-
Who designates the hold point during repairs and alterations?
Inspector
-
Who provides general authorization of limited or routine repairs?
Inspector
-
For repairs, who approves all methods of design, material, WPS, NDE, and testing?
Inspector OR engineer
-
For major repairs, temporary repairs, and alterations, who approves the methods, materials, WPS, NDE, and testing?
The inspector AND engineer
-
Who approves all repair and alteration work at hold points?
inspector
-
Who approves all repair and alteration work at completion of work?
the inspector
-
Who approves all nozzle installations?
the engineer
-
During repairs and alterations, who decides if PMI is required due to questionable material documents?
The inspector
-
Who must be satisfied that the temporary repair is adequate for vessel continued service?
the inspector and engineer
-
Who allows temporary welded repairs to remain in place past "next opportunity"?
The inspector AND engineer
-
Who determines if a crack will not propagate from under a fillet weld patch?
the engineer
-
Who approves the use of fillet-welded patch repairs?
The inspector AND engineer
-
Who approves the design and documentation of full encirclement lap band repair?
the inspector AND engineer
-
Who determines if a crack will not propagate from under a full encirclement lap patch?
The engineer
-
Who authorizes the repair welding of cracks at stress concentrations?
engineer
-
For insert plate repairs, who approves the use of NDE procedures as alternate to RT?
The inspector
-
Who reviews the weld spacing when install an insert plate? (distance to existing welds)
The engineer
-
Who reviews and approves the repair procedures for SS cladding?
The inspector AND engineer
-
Who considers the atomic hydrogen mitigation for a repair plan of welding SS clad or Overlay?
Engineer
-
Who monitors the repairs made to SS cladding or overlay?
inspector
-
Who uses welders and WPS's qualified to Sect IX or specified construction code?
Repair organization
-
Who verifies that welding is done within the welders range and WPS range?
Inspector
-
Who maintains record of qualified WPS's and WPQ's?
Repair organization
-
Who do the welding records need to be available to prior to welding?
The inspector
-
Who approves exceptions to preheat temperatures?
Engineer
-
Who monitors preheat temperatures
inspector
-
Who develops a procedure for local PWHT in lieu of a full encirclement PWHT?
Engineer
-
Who reviews the use of preheat in lieu of PWHT?
engineer
-
WHo reviews the use of controlled deposit welding in lieu of PWHT?
engineer
-
Who verifies that PWHT alternatives used are in compliance with specs and code?
inspector
-
Who sets the NDE acceptance standards after welding is complete?
Inspector OR construction code
-
who approves the use of alternate NDE methods after repairs and alterations?
Engineer AND inspector
-
Who performs calculations for rerates?
Engineer OR manufacturer/other
-
The vessel rerate must be acceptable to who?
engineer
|
|