SEUP 2NDED 10

  1. .
  2. .
  3. Which of the following
    could be a result
    of proper equipment calibration?

    Better spray coverage
    during high winds

    Unnecessary loss of time and money

    Inadequate pest control

    Effective pest control
    Effective pest control
  4. Why must you
    accurately measure the
    capacity of your
    spray tank?
    Tank manufacturer capacity ratings may be innacurate
  5. When making a
    pesticide application,
    increasing travel speed
    of the spraying equipment will :
    Decrease the amount of pesticide applied per acre
  6. If sprayer output is
    not changed,
    what will you
    need to do to
    the travel speed
    of the application
    equipment to
    maintain the same
    rate per acre when
    the swath width
    narrows from 20 to
    15 feet?
    Increase speed
  7. .
  8. For calibration,
    which four factors
    need to be measured?

    Travel speed, sprayer pressure,
    number of nozzles,
    and nozzle height

    Swath width, size of area
    to be treated, travel speed,
    and sprayer pressure

    Tank capacity, travel speed,
    swath width, and
    sprayer output (flow rate)

    Nozzle height, size of area
    to be treated, travel speed,
    and swath width
    Tank capacity, travel speed, swath width, and sprayer output (flow rate)
  9. To double the
    output volume of
    a sprayer by
    increasing pressure,
    you must adjust
    the pressure regulator
    to increase the
    pressure by a factor of :

    Two
    Three
    Four
    Five
    Four
  10. Your calibrated sprayer
    with a 300 gal tank
    will cover 4.2 acres.
    You plan to apply
    an herbicide at a
    label rate of
    1.5 pounds per acre.
    How much of
    this herbicide will
    you put into
    the spray tank?

    4.2 pounds
    4.5 pounds
    6.3 pounds
    12.6 pounds
    6.3 pounds
  11. It takes your
    equipment 3 mins
    to travel 264 ft.
    How fast, in mph,
    is the equipment traveling?

    1
    2
    3
    4
    1 mph
  12. By measuring the
    output of each
    nozzle on the
    spray boom,
    you discover that
    the sprayer output
    is 256 oz in 30 secs.
    What is the
    output of the
    sprayer in gals per min?

    2
    3
    4
    5
    4
  13. How many acres
    can you treat if
    your sprayer holds
    419 gals and you've
    calibrated it to
    spray 80 gals per acre?

    3.2
    4.8
    5.2
    6.3
    5.2
  14. A boom sprayer with
    flat fan nozzles
    is applying 6 strips,
    each one being
    24 inches wide.
    What is the swath
    width you would
    use for calibration?

    2ft
    4ft
    6ft
    12ft
    12ft
  15. It took 24 gals
    to refill an
    airblast sprayer
    after running it
    for 3 mins.
    What is the spayer's
    output in gals per min?

    5
    8
    10
    16
    8
Author
ianquinto
ID
331267
Card Set
SEUP 2NDED 10
Description
SEUP 2NDED 10
Updated