-
What term describes the time or number of arming vane revolutions needed for the firing train to align after a bomb is released?
Arming time
-
What means is used to initiate an electrical fuze?
Electrical impulse
-
What mechanical time fuze is used with dispenser weapons?
Mk 339 Mod 1
-
By what means, if any, can the factory set primary and optional functioning delay of the Mk 339 be changed for tactical requirements?
Adjusting the primary and option time-setting dials
-
What method is used to determine if the Mk 339 fuze has shifted from the primary to the option delay?
By checking the time setting observation window of the fuze
-
Which of the following weapons uses an FMU-143/B tail fuze?
GBU-24
-
What electronic bomb fuze is used in Mk 80/BLU 100 (series) general purpose bombs—including laser-quided bombs?
FMU-139
-
What electronic bomb fuze is used for retarded delivery of the Mk 80/BLU 100
-
What type of bomb is used in most routine bombing operations?
General-purpose (GP) bombs—currently the Mk 80/BLU 100 (series)
-
Identification of BLU-110/111/117A/B bombs loaded with PBXN-109 can be made by the stencil on the bomb body (front and rear) and by what other means?
Three yellow bands on the nose
-
A bomb body is shipped with a plastic plug installed in the nose and tail fuze wells to prevent what occurrence?
Damage to the internal threads and moisture from entering the fuze wells
-
When shipping bombs, what type of pallet is used?
Metal
-
When shipping, what factor determines the number of bombs that are loaded on
- each metal pallet?
- Size of bombs
-
Arming wire assemblies are used for what purpose?
Maintain ordnance components in a safe condition until the actual release of a weapon from an aircraft
-
Premature or accidental withdrawal of an arming wire from a component is prevented by the installation of which of the following devices?
Dexter Safety clips
-
A conical fin assembly is attached to the aft end of a bomb by what means?
Setscrews
-
What bomb fin is used with the Mk-82/BLU-111 to provide a retarded (high-drag) bomb delivery for the aircraft?
BSU-86
-
What general-purpose bomb, if any, is used with the BSU-85/B Air Inflatable Retarder?
Mk-83/BLU-110
-
How do laser-guided bombs detect a target?
Laser beam illumination
-
What location is the wing assembly mounted on the Guided Bomb Units?
The aft end of the bomb body
-
The computer-control group (CCG) of a laser guidance kit is used for what purpose?
To detect laser-illuminated targets and to provide an attachment point for the guidance fins
-
What modification kit is used to convert GP bombs into mines?
Bomb/Mine Conversion Kit Mk 130 Mod 1
-
What bomb body, if any, is used to make the Mk 63 mine?
MK83/BLU110
-
What is the purpose of the Mk 339 Mod 1 mechanical time fuze?
Initiate the linear-shaped charges in the cargo section wall
-
What are the components of the Mk 118 Mod 0 and Mod 1 antitank bombs?
Mk 1 Mod 0 fuzing system
Shaped-charge warhead
Fixed stabilizing fins
-
What is the primary purpose of practice bombs?
- Provide safety when training new or inexperienced pilots and ground-handling
- crews
-
What type of ammunition causes the most injuries to personnel?
Practice bombs
-
The history of rockets covers a span of how many centuries?
8
-
What initiating device ignites the propellant grain of a rocket?
Igniter
-
What component of a rocket contains the propellant, igniter, and nozzle?
Motor
-
The gases produced when rocket motor propellant burns create what type of force?
Thrust
-
Rockets are propelled by what means?
Expulsion of gases
-
Which of the following rocket components is/are a part of the motor?
Propellant and nozzle and fin assembly
-
What type of HE-FRAG warhead is used with a 5.0-inch rocket?
Mk 63 Mod 0
-
What type of warhead combines the effectiveness of HE-FRAG and HEAT warheads?
AT/APERS
-
What type of warhead is a compromise between the armor-piercing and fragmentation designs?
GP
-
A 2.75-inch rocket assembly can be carried and launched from which of the following launcher packages?
7 or 19 round packages
-
All 2.75-inch rockets may be shipped in which of the following configurations?
- Complete rounds in 7- or 19-tube launchers or in wooden boxes
- - Rocket motors in 7-tube launchers and fuze-warhead combinations in
- separate shipping containers
- Separate components in authorized shipping containers
-
Which NAVAIR publication provides authorized assemblies, safety precautions, and restrictions for airborne rockets?
11-75A-92
-
All 5.0-inch rockets should be received through the supply system in which of the following configurations?
- Rocket motors in a 4-round launcher
- Separate components in separate shipping containers
- Fuzes and warheads in separate shipping containers
-
A rocket motor should NOT be used if it has been dropped more than what prescribed number of feet?
A rocket motor should NEVER be used if dropped
-
When, if ever, should you attempt to remove the base fuze from a rocket warhead?
You should never attempt to remove the base fuze
-
Long-range missiles are usually capable of traveling what minimum number of miles?
100 miles
-
Speeds from Mach 0.8 to Mach 1.2 are referred to by what term?
Transonic
-
Speeds above Mach 5.0 are referred to by what term?
Hypersonic
-
A service missile is usually referred to as what type of missile?
A tactical missile
-
A training missile is classified as what type of missile?
A nonservice missile
-
A guided missile is designed to be air-launched as an intercept aerial missile. It is the 9th design and the 13th modification of the design. What designator is assigned to the missile?
AIM-9M
-
What are the classifications of missile homing systems?
Active, Semiactive, and Passive
-
Which of the following statements describes an AIM-7M guided missile?
- It is a supersonic missile
- It is an air-to-air missile
- It is launched from an interceptor aircraft
-
In an AIM-7M guided missile, the warhead is in what location?
Between the target seeker and flight control section
-
The missile battery is located in what section of a Harpoon guided missile?
The sustainer section
-
An AIM-9M Sidewinder guided missile has how many major components?
5
-
The control fins should be attached to what section of a Sidewinder guided missile?
The guidance and control section
-
What modification of a Mk 36 rocket motor is equipped with a safe-arm ignition assembly?
Mod 8
-
To reposition the safe-arm ignition assembly of a Mk 36 Mod 8 rocket motor,
- what tool should you use?
- A hex-head T-handle
-
An AGM-88C guided missile is designed to operate in what total number of modes?
3
-
The designation AGM-65E identifies what missile?
Maverick
-
What are the major assemblies of the LAU-7 guided missile launcher?
Housing, mechanism, power supply, and nitrogen receiver
-
Which of the following guided missile launchers is a complete launching system used with AIM-9M (series) missiles?
LAU-7
-
In the LAU-7 guided missile launcher, the missile's IR detector is cooled by what
- means?
- A nitrogen receiver
-
What are the two distinct interface configurations used for the AIM-9X?
Digital and Analog
-
What launchers are capable of launching the AIM-9X?
LAU-7 and LAU-127
-
What missile is an anti-armor terminal homing weapon that uses a variety of warhead configurations, including shaped charge, blast fragmentation, and thermobaric?
AGM-114
-
All versions of Hellfire missiles in the Navy and Marine Corps inventory are carried on what type of guided missile launcher?
M-272/M-299
-
What reusable missile launcher completes the F/A-18, AV-8, and P-3 aircraft suspension and launching system for the Maverick AGM-65 air-to-ground missile?
LAU-117
-
A hand-manipulated signaling device is used for all EXCEPT which of the signaling purposes?
Countermeasure
-
Pyrotechnic pistols includes all EXCEPT which of the following features?
Double-barreled
-
A Mk 124 Mod 0 marine smoke and illumination signal emits what color
- smoke/flame for (1) day use and (2) night use?
- (1) Orange smoke (2) red flame
-
The day or night end of a Mk 124 Mod 0 signal is marked in which of the
- following ways?
- The case has two raised beads around its circumference on the flare (night) end and a label adhered to outer surface of the case identifies the
- smoke (day) and flare (night) end
-
A Mk 79 Mod 0 illumination signal kit consists of a _________ signal projector and a total of _____ Mk 80 Mod 0 signals.
Mk 31 Mod 0, seven
-
When fired, the star ejected from a Mk 80 Mod 0 signal burns for what minimum
- amount of time?
- 4.5 seconds
-
Before loading a signal into a Mk 31 Mod 0 signal projector, you should first take
- what action?
- Make sure the signal projector is cocked
-
The illuminating candle in the LUU-2B/B aircraft parachute flare is made from what materials?
Magnesium, sodium nitrate, and a polymer binder
-
Approximately how many pounds of force is required to pull the timer knob from the timer of an LUU-2B/B aircraft parachute flare?
30 pounds
-
When a Mk 25 marine location marker is handled, what component physically
- prevents the base plugs from being accidentally pushed in?
- The arming plate
-
When a Mk 25 Mod 2 marker is in the water, what liquid serves as an electrolyte to produce a current in the battery?
Seawater
-
What is the average burn time of a Mk 25 Mod 2 marine location marker?
13.5 to 18.5 min
-
A Mk 25 will provide smoke and flame for approximately how long?
10 to 20 min
-
IR decoys generate heat and infrared energy which is used to distract what type of missile?
Infrared heat-seeking
-
Passive expendables are filled with chaff, which is dispensed by aircraft to mask or screen other aircraft or to cause tracking radar to do what?
Break lock
-
What signal cartridge produces a flash of light and a white puff of smoke?
Mk 4 Mod 3
-
What color smoke is produced by a CXU-3 signal cartridge?
White
-
To extinguish an aircraft parachute flare that is burning in the open, which of the following methods should be used?
Flooding quantities of water at low pressure
-
Pyrotechnic hazards are frequently increased by what factor(s)?
Age of pyrotechnic
Improper storage conditions
Excessive temperatures
-
What is the primary weapon used in antisubmarine warfare?
Torpedo
-
A Mk 46 Mods torpedo can be assembled into how many recoverable exercise
-
To ensure a predictable air trajectory and water entry without causing structural damage to a Mk 46 torpedo, what means is used?
Air stabilizer
-
To suspend Mk 46 torpedoes from the bomb racks or shackles of the launching aircraft, which of the following suspension band configurations can be used?
Two Mk 78 Mod 0
-
Component location information for a Mk 46 torpedo is contained in what NAVSEA publication?
SW512-AO-ASY-010
-
What is the major advantage of using Otto fuel II in torpedoes?
It requires a short turnaround time for exercise weapons
-
Otto fuel II safety, storage, and handling instructions are contained in which of
- the following NAVSEA publications?
- S6340-AA-MMA-010
-
When a person is initially exposed to Otto Fuel II vapors, what symptoms could occur?
A headache and dizziness
Nasal congestion
A drop in blood pressure
-
Aircraft-laid mines are used in which of the following types of operations?
Offensive or defensive
-
Magnetic, acoustic, and pressure mines are grouped into which of the following general classifications?
Influence only
-
Depending on the type of mine, the explosive system may contain which of the following components?
A booster, a main charge, and an initiating system
-
Air-laid mines contain which of the following types of explosives?
HBX, Comp B, H6, or TNT
-
The arming device in an air-laid mine consist of a _________ switch piston
- and a ___________ aligning piston?
- Hydrostatic, explosive
-
A Mk 63 service mine is classified as what type of mine?
A bottom mine
-
What safety device is used in a Mk 65 mine?
Mk 45
-
Mines must be jettisoned in water that is at least how many feet deep?
800
|
|