Windows Server Administration Cap 3

  1. ____ uses two or more drives used in combination to create a fault-tolerant system.
  2. _____ is a commonly used RAID technology that does not provide fault tolerance.
    RAID 0
  3. A(n) _______ is an extra drive that can be automatically swapped when a drive fails.
    hot spare
  4. A(n) ______ is an architecture used for disk arrays, tape libraries, and optical jukeboxes based on networking technology.
    storage area network
  5. The _________ sends SCSI commands to a SAN over a TCP/IP network.
  6. The _________ is a Windows Server 2008 feature that allows you to create and manage logical unit numbers (LUNs) on both Fibre Channel and iSCSI disk storage subsystems that support VDS.
    Storage Manager for SANs
  7. A(n) _________ is a method of storing and organizing computer files so that you can easily find them and access them.
    file system
  8. NTFS can support up to _________ of storage space for each volume.
    16 exabytes
  9. The _________ program is the command interface to partition drives.
  10. A(n) _________ uses volumes stored on two separate physical disks to write data onto both disks simultaneously and redundantly.
    mirrored volume
  11. Which type of drives offer faster performance and are usually found on servers?
    a. SCSI
    b. IDE
    c. RLL
    d. MFM
    a) SCSI
  12. Which common form of RAID uses three or more disks to provide fault tolerance?
    a. RAID 0
    b. RAID 1
    c. RAID 3
    d. RAID 5
    d) RAID 5
  13. How much disk space would you have if you use four 2 TB drives in a RAID 5 configuration?
    a. 2 TB
    b. 4 TB
    c. 6 TB
    d. 8 TB
    c) 6TB
  14. Which type of RAID uses a striped data set that is mirrored with RAID 1?
    a. RAID 4
    b. RAID 5
    c. RAID 1+0
    d. RAID 0+1
    d. RAID 0+1
  15. Which device is a file-level data storage drive that provides access to shared files and folders?

    a. SAN
    b. NAS
    c. RAID
    d. Hot spare
    b. NAS
  16. What is the default port used by iSCSI?
    a. 3000
    b. 8080
    c. 3260
    d. 443
    c. 3260
  17. Windows Server 2008 uses an _____ to communicate to a SAN based on iSCSI.
    a. iSCSI connector
    b. iSCSI initiator
    c. iSCSI plug-in
    d. iSCSI snap-in
    b. iSCSI initiator
  18. Which Fibre Channel topology provides optimized connection when isolating failed ports?
    a. FC-P2P
    b. FC-AL
    c. FC-SW
    d. FC-SNP
    c. FC-SW
  19. What units used in a SAN can be assigned to a server?
    a. HBAs
    b. snapshots
    c. LUNs
    d. ANSIs
    c. LUNs
  20. Which type of volume do dynamic disks not support?
    a. Simple volume
    b. Striped volume
    c. Stripped mirror volume
    d. RAID-5 volume
    c. Stripped mirror volume
  21. When configuring IDE drives, you must configure a SCSI ID and terminate bothends of the chain.

    True or False
  22. Two volume types used by Windows Server 2008 are MBR and GPT

    True or False
  23. NTFS is the preferred file system used by Windows Server 2008.

    True and False
  24. Basic disks can be resized without rebooting.

    True or False
  25. GUID partition types can support up to 18 EB drives.

    True or False
Card Set
Windows Server Administration Cap 3
Chapter 3 knowledge assessments pag 85-87