Home
Flashcards
Preview
C6
Home
Get App
Take Quiz
Create
spacing hinge side: ____ inches
1/16
undercut interior: ____ inches
7/8
space between door & head jamb: ____ inches
1/8
space latch & strike side: ____ inches
1/8
R/O should be ____ inches larger than net size of door
2 1/2
interior door stiles and rails: ____ inches
4 1/2
backset for exterior latch: ____ inches
2 3/4
backset for interior latch: ____ inches
2 3/8
hinge left opens inward
LH
hinge right opens inward
RH
hinge left opens outward
LH reverse
hinge right opens outward
RH reverse
anatomy of a door opening
header
king stud
trimmer stud
anatomy of a window opening
header
trimmer stud
rough sill
top cripple studs
bottom cripple studs
egress size
5.7 sq ft
windows must be tempered if less than ____ inches from the floor
18"
for exterior doors stiles and rails must be at least ____ inches
5 3/8
no more than ____ inches is allowed between the bottom of an interior door and the floor.
7/8
exterior door rails must be at least ____ inches
11 3/8
interior door bottom rails must be at least ____ inches in width
9
edges of cutouts for louvers or lights must be at least ____ inches away from any edge
5
how many basic sq ft for residential kitchen space?
18
interior door thickness
1 3/8
exterior door thickness
1 3/4
when nailing casing space nails _____ inches apart
16
rabbeted jambs must be at least _____ inches
1 3/16
rough milled lumber 4/4= ? _____ inches
1
rough milled lumber 5/4= ? _____ inches
1 1/4
rough milled lumber 6/4= ? _____ inches
1 1/2
rough milled lumber 8/4= ? _____ inches
2
a warp in any direction of lumber more than _____ inches is considered a defect
3/8
on stairs the rise of every step must be at least ____ inches and no greater than ____ inches
4, 7
standard depth upper kitchen cabinet
12"
which screw has greatest holding power
2" No. 12
the strenght of a stile & rail door is primarily dependent on:
the shoulders & joints between the stiles & rails
standard depth of a kitchen countertop
24"
Author
Anonymous
ID
26987
Card Set
C6
Description
C6 Contractor
Updated
2010-07-16T03:22:21Z
Show Answers
Home
Flashcards
Preview