1. What are the three types of Vservers in clustered Data ONTAP 8.2? (choose all that apply)
A. System Vserver
B. Node Vserver
C. Admin Vserver
D. Data Vserver
E. Management Vserver
F. Cluster Vserver
B C D
2. What is considered a node in clustered Data ONTAP?
C.
3. What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving only NAS protocols?
E.
4. What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving SAN and NAS protocols?
D.
5. In clustered Data ONTAP, which object exposes data to clients?
D.
6. Which LIF is associated with the admin vserver?
C.
7. Which of the following shells are part of a Data ONTAP cluster? (choose all that apply)
A. Management
B. Admin
C. System
D. Node
E. Cluster
F. Advanced
C D E
8. Which of the following Vserver types are created automatically by the cluster setup process? (choose all that apply)
A. Management
B. Admin
C. Cluster
D. Node
E. Data
F. Diagnostic
B D
9. Which of the following protocols can be used to obtain the clustered ONTAP 8.2 software image? (choose all that apply)
A. NFS
B. FTP
C. TFTP
D. HTTPS
E. HTTP
F. CIFS
B C E
10. What is the default shell for accessing clustered Data ONTAP?
D.
11. Which built-in user can access the system shell?
B.
12. What is the default cluster shell account?
A.
13. Which of the following privilege levels are found in clustered data ONTAP? (Choose all that apply)
A. admin
B. advanced
C. diagnostic
D. system
E. cluster
A B C
14. In clustered Data ONTAP, which prompt verifies that you are in the cluster shell if the cluster is named “netappu”?
C.
15. In which shell can administrators natively run Data ONTAP 7-mode commands?
D.
16. Which of the following make up the replicated database (RDB) rings in a cluster? (choose all that apply)
A. Protocol management daemon (protdb)
B. Management (mgwd)
C. Administration (admdb)
D. Volume location database (vldb)
E. Virtual-interface manager (vifmgr)
F. Logical-interface manager (lifmgr)
G. SAN management daemon (bcomd)
B D E G
17. With regards to maintaining cluster quorum, epsilon functions as a:
D.
18. Which of the following is true about the storage module?
C.
19. If a cluster is in quorum, what is the minimum number of participating nodes that must be healthy?
D.
20. The root volume of a node in the cluster is named
A.
21. Which of the following statements is true about the cluster session manager? (Choose all that apply)
A. Handles networking, NFS, and CIFS
B. Provides a communication mechanism between any network module or SCSI module and any data module
C. Provides a reliable transport for SpinNP traffic
D. Is used regardless of whether the network module or SCSI module and data module are on the same node or different nodes
B C D
22. Which of the following statements is true about epsilon?
B.
Physical and Logical Data Storage
23. NAS clients see junctions as ______________ in the parent volume.
D.
24. When a client goes through a junction, the client has entered:
C.
25. Select the following statements that are true about unplanned storage failover (SFO). (Choose all that apply)
A. The “down” system is entirely virtually hosted by the HA partner and appears to be “up”.
B. The data LIFs are always migrated to the HA partner
C. The surviving partner assumes ownership of the failed partners aggregates
D. The volume location database (VLDB) is updated with the new location of the aggregates and volumes
C D
26. Which of the following statements is true about giveback with storage failover?
D.
27. Junctions are used to join volumes to …
A.
28. Which of the following statements is true about a Flash Pool?
D.
29. FlexCache volumes in clustered ONTAP 8.2
C.
30. In clustered Data ONTAP 8.2, an aggregate by default is _________.
B.
31. What is the minimum number of disks in a non-root aggregate with RAID-DP
D.
32. A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volume move moves this volume to the netappu-01 aggregate. What is the path to this volume after the move?
C.
33. What is aggregate relocation (ARL)? Choose all that apply.
A. Provides zero copy, non-disruptive relocation of (non-root) online SFO aggregates to a partner node
B. Provides zero copy, non-disruptive relocation of (root) online CFO aggregates to a partner node
C. Is utilized during planned events such as fast negotiated takeovers, controller hardware upgrades, and other maintenance operations
D. Is utilized during unplanned events such as controller failure
A C
34. The aggregate relocation feature allows an administrator to move a __________.
A.
Physical and Virtual Networking
35. From the output of the command “network interface show”, the logical interface that has a value of “false” under the “Is Home” column signifies it (choose all that apply)
A. Is disconnected
B. Has failed over
C. Is administratively disabled
D. Has been migrated
E. Is currently being migrated to home node
B D
36. Which of the following logical interfaces have failover and migration capabilities between nodes? (choose all that apply)
A. Data (FC, iSCSI)
B. Cluster management
C. Data (CIFS, NFS)
D. Node management
E. Cluster interconnect
B C
37. What is a LIF? (choose all that apply)
A. A logical interface connection
B. A logical inter-fabric connection
C. May be associated with a IP address
D. May be associated with a WWPN
E. May be associated with a interface group
A C D E
38. What are the LIF roles that can be assigned to ports in clustered ONTAP? (choose all that apply)
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster
A B C D E
39. What are the roles that can be assigned to physical ports in clustered ONTAP? (choose all that apply)
A. Data
B. Cluster management
C. Cluster
D. Node-management
E. Intercluster
A C D E
40. Which of the following are types of failover groups? (Choose all that apply)
A. System defined
B. User defined
C. Next Available
D. Priority
E. Clusterwide
A B E
41. Which of the following statements are true about SAN LIFs? (choose all that apply)
A. SAN LIFs are either up or down
B. NAS and SAN protocols can share the same LIF
C. SAN LIFS can migrate or failover
D. SAN LIFs can be associated with more than one data vserver
E. NAS and SAN LIFs can share the same data port
A E
42. How many cluster nodes are supported by the CN1610 Interconnect Switch in 8.2?
C.
43. The Cisco Nexus 5010/5020 interconnect switches require ______ISL connections where the CN1610 requires ___________ISL connections.
B.
44. Which of the following types of LIFs can be assigned a user-defined failover group? (Choose all that apply)
A. Cluster LIF
B. Node-management LIF
C. Cluster management LIF
D. NAS Data LIF (NFS,CIFS)
E. SAN Data LIF (iSCSI, FC)
B C D
45. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:
C.
46. A volume is created named “new_acct” in a data vserver named vs2. A junction for this volume is created named “acct” from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs to mount?
B.
47. An export policy can determine access to volumes for which of the following protocols?
B.
48. Which of the following statements is true about export policies?
A.
49. Export policies and rules are stored in the …
E.
50. In clustered ONTAP, what benefit does NFSv4.1 pNFS provide?
B.
51. Which clustered ONTAP objects are “owned” by a data Vserver? (choose all that apply)
A. Aggregates
B. Volumes
C. LUNs
D. Ports
E. LIFs
F. Shelves
G. Disks
B C E
52. Clustered Data ONTAP supports ALUA with which protocols?
D.
53. You create a Vserver for iSCSI LUNS. When you issue the Vserver iscsi show command it reports: “This table is currently empty”. What do you need to do to see the IQN for the vserver?
D.
54. Which SAN LIF fails over?
E.
55. What must be configured on the igroup in a multi-pathed SAN environment in clustered Data ONTAP?
E.
56. Which commands can be used to identify the target iqn name in clustered Data ONTAP? (Choose all that apply)
E.
57. What command is used to show an iSCSI software initiator WWPN?
B.
58. Which feature must be enabled on a FC switch when using the FC protocol with clustered Data ONTAP 8.1?
B.
59. The fcadmin config command…
D.
60. When storage failover (SFO) occurs and cluster mode SAN protocols are enabled on a data vserver:
B.
61. What is the maximum number of nodes supported for clustered ONTAP 8.2 serving both SAN and NAS protocols?
D.
62. Which LIF is associated with the admin Vserver?
E.
63. Which make up the replicated database (RDB) rings in a cluster? (choose all that apply)
A. protocol management daemon (protdb)
B. management application (mgmt)
C. administration (admdb)
D. volume location database (vldb)
E. virtual-interface manager (vifmgr)
F. logical-interface manager (lifmgr)
G. SAN management daemon (bcomd)
B D E G
64. NAS clients see junctions as ______________ in the parent volume.
D.
65. With regards to maintaining cluster quorum, epsilon functions as a ______________.
C.
66. When a client transverses a junction, the client has entered:
B.
67. When a cluster is in quorum, what portion of participating nodes are healthy?
B.
68. Which statement is true about a Flash Pool?
B.
69. A volume named vs2_vol2 is created on the netappu-02 aggregate. The path in the vs2 namespace is /vs2/vol2. If the volume is moved to the netappu-01 aggregate, what is the path after the move?
B.
70. Which are types of failover groups? (choose all that apply)
A. System-defined
B. User-defined
C. Next Available
D. Priority
E. Clusterwide
A B E
71. Which statements are true about SAN LIFs? (choose all that apply)
A. SAN LIFs are either up or down?
B. NAS and SAN protocols can share the same LIF
C. SAN LIFS can migrate online or automatically failover
D. SAN LIFs can be associated with more than one data Vserver
E. NAS and SAN LIFs can share the same data port
A E
72. Which types of LIFs can be assigned a user-defined failover group? (choose all that apply)
A. Cluster LIF
B. Node-management LIF
C. Cluster-management LIF
D. NAS data LIF (NFS,CIFS)
E. SAN data LIF (iSCSI, FC)
B C D
73. Which clustered ONTAP objects are “owned” by a data Vserver? (choose all that apply)
A. Aggregates
B. Volumes
C. LUNs
D. Ports
E. LIFs
F. Shelves
G. Disks
B C E
74. Clustered ONTAP 8.1 and later supports ALUA with which protocols?
C.
75. How many cluster nodes are supported by the CN1610 Interconnect Switch in clustered ONTAP 8.2?
E.
76. What is the default shell for accessing clustered ONTAP?
D.
77. Which SAN LIF type allows failover?
F.
78. What must be configured in clustered ONTAP 8.2 to support inter-cluster Snapmirror relationships? (choose all that apply
A. Cluster peering relationship
B. Intercluster port role
C. Junction path for the mirrored volume
D. Minimum transfer size
E. Vserver peering relationship
A E
79. What must be enabled on the igroup for SAN protocols in clustered Data ONTAP?
D.
80. Which statements are true about a data protection (DP) mirror destination volume? (choose all that apply)
A. Can be in the same Vserver as the source Vserver
B. Can be in a different Vserver than the source Vserver
C. Can be on a different cluster from the source Vserver cluster
D. Can be on a Data ONTAP 7-mode system
E. Can be smaller than the source
A B C
81. Which versions of NFS are supported with clustered ONTAP 8.2 Vservers with FlexVol volumes?
B.
82. Which protocols are supported with clustered ONTAP 8.2 Vservers with Infinite Volumes?
B.
83. Which statement is true about CFO and SFO in clustered ONTAP?
D.
84. Which configurations are supported in clustered ONTAP 8.2? (choose all that apply)
A. Single-node clusters
B. Switchless 2-node clusters
C. Switchless 4-node clusters
D. 5-node clusters
E. 8-node clusters with NAS and SAN
F. 24-node clusters with NAS and SAN
A B E
85. What are the three types of Vservers in clustered ONTAP? (choose all that apply)
A. Node Vserver
B. Admin Vserver
C. Data Vserver
D. System Vserver
A B C
86. What is the default system account?
D.
87. The root volume of a node in the cluster is called __________.
D.
88. When creating a LIF for NFS or CIFS, what is the default failover policy?
B.
89. Storage QOS maximum throughput limits can be defined in terms of:
C.
90. The aggregate relocation feature allows an administrator to move a __________.
D.
91. In clustered ONTAP 8.2, which statement is true about backup vaults?
D.
92. What is the supported speed and frame size on the cluster interconnect?
D.
93. What is considered a node in a clustered ONTAP?
B.
94. A block from a Flash Pool read operation is initially marked as __________.
C.
95. What is the maximum number of nodes supported for a cluster serving only NAS protocols?
D.
96. Which statements are true of licensing in clustered ONTAP 8.2? (choose all that apply)
A. The base license is still required and is based on the node count
B. Licenses are node-locked
C. Length of license is 14 characters
D. Length of license is 28 characters
E. HA functionality doesn’t require a license
F. HA functionality requires a license
B D E
97. The network interface show command output lists the value of “false” under the “Is Home” column. False signifies the LIF __________. (choose all that apply)
A. is disconnected
B. has failed over
C. is administratively disabled
D. has been migrated
E. is currently being migrated to home node
B D
98. What type of LIF is used to replicate between two clusters?
E.
99. Which logical interfaces have failover and online migration capabilities in a different node? (choose all that apply)
A. Cluster
B. Cluster management
C. Data (FC, iSCSI)
D. Data (CIFS, NFS)
E. Node-management
B D
100. How many cluster ports per node are supported in clustered ONTAP 8.2?
D.
101. Which privilege levels are found in clustered ONTAP? (choose all that apply)
A. single_user
B. admin
C. manage
D. advanced
E. diagnostic
F. backup
B D E
102. Which Vserver types are created automatically by the cluster setup process? (choose all that apply)
A. Management
B. Admin
C. Protocol
D. Node
E. Data
B D
103. Which commands can be used to create a data Vserver? (choose all that apply)
A. vserver configure
B. vserver setup
C. vserver set_up
D. vserver make
E. vserver create
B E
104. Clustered ONTAP supports multi-tenancy using which feature?
B.
105. How many ISL ports are required between the cluster interconnect switches when using Cisco switches?
B.
106. How many ISL ports are required between the cluster interconnect switches when using CN1610 switches?
A.
107. Which are predefined roles for cluster administrators in clustered ONTAP 8.2? (choose all that apply)
A. admin
B. read only
C. vsadmin
D. vsadmin-backup
E. vsadmin-readonly
F. backup
G. vsadmin-autosupport
H. none
A B H
108. Clustered ONTAP 8.2 supports which quota types? (choose all that apply)
A. User
B. Volume
C. Group
D. Tree
E. None; clustered ONTAP doesn’t support quotas.
A B D
109. FlexCache volumes in clustered ONTAP 8.2 __________.
B.
110. In clustered ONTAP, what object exposes data to clients?
D.
111. How do you create NFS export within clustered ONTAP?
A.
112. In which shell can administrators natively run Data ONTAP 7-Mode commands?
A.
113. What is the command to start recording the current CLI session into a file?
A.
114. The system image show command output lists the value of “true or false” under the “Is Current” column. The image marked “true” indicates the image:
A.
115. Which statements are true regarding backup vaults in clustered ONTAP 8.2? (chose all that apply)
A. Data can only be restored to a qtree.
B. Backup vaults are at either a volume or qtree level.
C. Data can be restored to either the source volume or a new volume on the same or different clusters.
D. Backup vaults are at the volume level only.
E. Compatible with 7-mode SnapVault.
C D
116. By default how many management ports are there per node?
C.
117. How do you organize volumes for data clients with an appropriate export policy?
A.
118. Which are the role types that can be assigned to ports in clustered ONTAP? (choose three)
A. Data
B. Cluster-management
C. Cluster
D. Node-management
A C D
119. Which term is used to highlight that a storage administrator can add more than 2 storage systems to a cluster?
B.
120. Which of the following statements are true in a SnapMirror Load-Sharing (LS) mirror relationship? (Choose two)
A. Client requests to write data are allowed if the user is admin
B. Client requests to write data are denied unless accessing the .admin share
C. Client requests to read data are only allowed if the mirror is up-to-date
D. Client requests to read data are redirected to the LS mirror destination volumes
B D
121. In clustered Data ONTAP, snapshots are scheduled by creating
A. A snapshot policy within the vserver that applies to all volumes in the vserver
B. A snapshot policy within the vserver that is applied at the volume level
C. A snapshot policy within the clustershell that can be used by every vserver but applied individually at the volume level
D. A snapshot policy within the clustershell that can be used by each vserver but applies to all volumes within the vserver
C D
122. Where can NDMP backups be performed?
A.
123. Which statement is true about establishing a SnapMirror relationship in clustered data ONTAP?
D.
124. Which type of LIF allows replication between two clusters?
B.
125. What must be configured to support inter-cluster Snapmirror relationships?
B.
126. What communication link is necessary in order to establish an inter-cluster relationship?
C.
127. Which of the following is true about a data protection (DP) mirror destination volume? (Choose all that apply)
A. Can be in the same vserver as the source
B. Can be in a different vserver as the source
C. Can be on a different cluster from the source
D. Can be on a Data ONTAP 7-mode system
E. Can be smaller than the source
A B C
128. In clustered Data ONTAP 8.2, which of the following commands will restore an entire volume
B.
129. Which of the following statements are true about data protection mirrors? (Choose all that apply)
A. A data protection source volume supports up to 4 destination mirrored volumes
B. A data protection source volume supports up to 1 destination volume per node
C. A volume must be created before it can be used as a mirror destination
D. Creating a mirror relationship also creates the destination volume
A C
130. Which storage efficiency features are available in clustered Data ONTAP 8.2? (choose all that apply)
A. Thin provisioning
B. FlexClone
C. Deduplication
D. SnapVault
E. Compression
F. SyncMirror
A B C E
131. Which feature is NOT supported by clustered Data ONTAP 8.2?
C.
132. What are some of the benefits to customers when using clustered Data ONTAP? (Choose all that apply)
A. Scalability
B. Transparency
C. Flexibility
D. Non-disruptive operations
A B C D
133. In clustered Data ONTAP, which object presents data to clients?
C.
134. Which LIF is associated with the admin vserver?
C.
135. Which user space utility is used to manage NFS and CIFS access?
D.
136. Which user space utility is used to manage other applications in the user space?
D.
137. Which of the following statements is true about the cluster session manager? (Choose all that apply)
A. Handles networking, NFS, and CIFS
B. Provides a communication mechanism between any Network module or SCSI module and any Data module
C. Provides a reliable transport for SpinNP traffic over TCP/IP
D. Is used regardless of whether the Network module or SCSI module and Data module are on the same node or different nodes
B C D
138. The vifMgr is out of quorum on the node that is the master for the vifMgr ring. Which of the following statements are true? (choose all that apply)
A. A new master will be elected for the vifMgr RDB unit
B. Epsilon will not be available in the cluster
C. Clients can access data through the LIFs on this node
D. A new LIF can be created for a data vserver
A C
139. Which of the following statements is true about epsilon?
A.
140. If a customer has a 2-node cluster, which of the following must be enabled for storage failover (SFO) to function properly?
C.
141. What are the LIF roles that can be assigned to ports in Data ONTAP Cluster-Mode? (choose all that apply)
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster
A B C D E
142. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:
B.
143. Which of the following steps must be completed before a CIFS share can be active?
A.
144. A volume is created named “new_acct” in a data vserver named vs2. A junction for this volume is created named “acct” from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs to mount?
E.
145. Which of the following are appropriate client specification for an export rule? (Choose all that apply)
A. 0.0.0.0/0
B. 192.168.5.0/24
C. .eng.netapp.com
D. \\vs_root\192.168.153.128
A B C
146. Which steps need to be completed when creating a CIFS share? (Choose all that apply)
A. Configure a share policy
B. Configure an export policy
C. Configure name mapping
D. Configure a snapshot policy
E. Create a junction path within the Vserver namespace
B C E
147. Which commands can be used to identify the target iqn name in clustered Data ONTAP 8.2? (Choose all that apply)
