NS03

After upgrading to DOT
8.07-mode, you can convert existing 32-bit aggregates into 64-bit aggregates.

A. True

B. False

With 64-bit aggregates, the
number of FlexVols that can be created on a storage controller is ____.

A. 500

B. 1000

C. 6400

D. 64000

The largest volume that can
be created on a 64-bit aggregate is ___.

A. 10 TB

B. 16 TB

C. 64 TB

D. Equal to size of the
aggregate

XML-files in
/etc/stats/preset are used together with the sysstat command to customize the
output.

A. True

B. False

When migrating from Data
ONTAP 7G to Data ONTAP 8.0 7-mode, existing non-traditional
aggregates are designated as ________.

A. 16-bit

B. 32-bit

C. 64-bit

D. Foreign

E. Unknown

To create a 64-bit
aggregate, which optional switch/flag/parameter/option to the aggr create
command must be included?

A. b 64

B. B 64

C. l 64

D. L 64

E. No optional
switch/flag/parameter/option is needed because 64-bit aggregates are the
default

Which are three valid data
protection solutions? (Choose three.)

A. SnapVault toVolume SnapMirror

B. SnapVault toVolume
SnapMirror to SnapVault

C. SnapVault toVolume
SnapMirror toVolume SnapMirror

D. Volume SnapMirror to
SnapVault

Protection Manager has
policies that allow for tape-based protection as well as disk-based
protection.

A. True

B. False

When using a Protection
Manager policy to manage Open Systems SnapVault backups on a UNIX
server, which three are valid objects to include in the data set? (Choose
three.)

A. A file

B. A qtree

C. A directory

D. Theentire client

Protection Manager is an
optional component of the Operations Manager that can be licensed and
accessed from the NetApp Management Console (NMC).

A. True

B. False

Operations Manager can
monitor and manage only NetApp storage hosts that have the NetApp
Host Agent installed.

A. True

B. False

When using MetroCluster in
a forced takeover mode, identify two methods for restricting access to
the disaster site node. (Choose two.)

A. Use manual fencing.

B. Use the cf giveback -f
command.

C. Use the cf forcetakeover
-d command.

D. Turn off power to the
disaster site node.

E. Isolate the failed node
from the surviving node.

In a fabric-attached
MetroCluster, a “site failure” is described as a __________.

A. failure of the
Inter-Switch-Links (ISL)

B. failure of the
interconnect cable

C. complete failure of the
primary controller and disk shelves

D. malfunction of the Fibre
Channel adapter on the cluster node

Which two statements are
true of the cf forcetakeover -d command? (Choose two.)

A. Mirrored volumes are implicitly
split.

B. Partner mailboxes must
be available.

C. The failed cluster node
is powered off automatically.

D. The surviving cluster
node takes over the functions of the failed partner.

You have connected all
cables and disk shelves in a fabric-attached MetroCluster. Which
command would verify that disks are connected and have dual paths?

A. disk show

B. sysconfig -p

C. vol status -r

D. storage show disk -p

After issuing the aggr
split aggr0/plex0 aggrNew command ____________.

A. there is a new plex
called aggrNew

B. there are two new
plexes, plex0 and plexNew

C. there is a new mirrored
aggregate called aggrNew

D. there are two unmirrored
aggregates, aggr0 and aggrNew

E. flexible volumes are
evenly split between aggr0 and aggrNew

Normally, before you split
a SyncMirror volume, you ensure that both plexes are _______ and
_______.

A. offline, quiesced

B. online, consistent

C. online, normal

D. restricted, offline

You can avoid data
corruption when you issue the cf forcetakeover -d command if the remote node is
________.

A. in a giveback mode

B. fenced off manually

C. powered on and
accessible

D. powered off and
inaccessible

A mirrored volume has a
failed disk, but there are no available spares in the pool from which the degraded
plex was built. Data ONTAP will __________.

A. halt all operations to
volumes in that pool

B. choose spare disks to
reconstruct from the opposite pool

C. warn you that there are
no available spares from the proper pool

D. “halt” after 24 hours if
spare disks are not added to the proper pool

The required hardware to
add SyncMirror to an existing system would be ____________.

A. disk shelves and cluster
interconnect

B. disk shelves and
termination switches

C. disk shelves, Ethernet
adapters, and cabling

D. disk shelves, Fibre
Channel adapters, and cabling

Which two are true when
creating a SyncMirror volume? (Choose two.)

A. The disks selected for
Plex 0 and Plex 1 must come from the same disk shelf.

B. The disks selected for
Plex 0 and Plex 1 must come from the same disk pools.

C. The number of disks
added must be an even number and equally divided between the two plexes.

D. The disks are selected
first on the basis of equivalent bytes per sector (bps) size, then on the basis
of the size of the disk. If there is no equivalent-sized disk, Data ONTAP takes
a larger capacity disk and right-sizes it.

What happens when two
aggregates are rejoined?

A. It is not possible to
rejoin aggregates.

B. Data ONTAP will always
retain data from the newest aggregate.

C. Both aggregates revert
to the last common snapshot before the split.

D. You will have a large
new aggregate containing all volumes from both aggregates.

E. One of the aggregates
will be overwritten and you will lose any data changed on it after the split.


Ans. E

You cannot remove the
SyncMirror license if one or more mirrored volumes exist.

A. True

B. False

When using SnapRestore to
restore a single LUN, the LUN must be ___________.

A. exported and accessible

B. mapped to a Windows
server

C. mounted on a host

D. taken offline or
unmapped

For aggregates or
traditional volume SyncMirror to work correctly, the configuration of each plex
should be identical with regard to ____________.

A. NVRAM

B. Mirrored Snapshot copies

C. RAID groups and disk
sizes

D. NDMP and Snapshot copies

One method of configuring
an interface for takeover is to enter ifconfig interface partner address at
the command line. To make this configuration persistent across reboots, you
must enter this
information in the _____ file for each system.

A. /etc/rc

B. /etc/hosts

C. /vol/vol0/home

D. /vol/vol0/mount

What is the maximum
distance between a standard clustered pair at 2Gbps?

A. 10 meters

B. 50 meters

C. 100 meters

D. 500 meters

In an active/active
configuration in takeover mode, the surviving controller interfaces will
reflect the
identity of the ________.

A. local interfaces only

B. failed partner
interfaces only

C. local and failed partner
interfaces

D. interfaces as defined in
the /etc/rc file

You are troubleshooting a
clustered failover problem at a customer site. The customer explains
that both storage systems were NFS mounted onto the Solaris host. While in
takeover mode, you
attempt to create a file on the NFS mount point for the inaccessible system,
but you get the
following error:
NFS server filer2 not responding still trying.
When not in takeover mode, both storage systems operate normally and you do not
get the error.
You perform a “cf giveback” and you can now create a file over NFS on both
systems. What
should you do first to resolve this issue?

A. Replace the NIC adapter.

B. Submit a new bug report.

C. Use the cluster-config-checker.cgi
to identify the problem and corrective action.

D. Replace the cluster
interconnect card and run diagnostics “all” to ensure proper system operation.

Each storage system in a
cluster must have network access to the __________.

A. Internet

B. cluster partner

C. same administration

D. host same collection of
subnets

A volume SnapMirror
relationship is allowed between two SnapLock Compliance volumes if the
destination volume has unexpired WORM files.

A. True

B. False

What is the maximum number
of disk shelves per loop in a fabric-attached MetroCluster?

A. 1

B. 2

C. 4

D. 6

Which command displays the
disk ownership for both CPU modules in a FAS2020 system?

A. disk own -s

B. disk show -v

C. vol status -r

D. disk display r

To remove a cluster setup,
you must perform these steps:
1. Type cf disable.
2. Unlicense cluster.
3. Remove partner entries for network interfaces from the /etc/rc file.
4. Halt and make sure the partner-sysid is blank.
5. Power down and remove the cluster interconnect card.
6. Perform steps 1-5 above on the partner node.

A. True

B. False

Snapshot copies for
SnapLock volumes are deleted automatically according to the retention count
set in the Snapshot schedule.

A. True

B. False

What security mechanism can
an administrator use on an OSSV client to set permissions allowing
backups to a SnapVault secondary system?

A. Via /etc/hosts.equiv
file

B. QSM access list
modifiable via svconfigurator

C. Contents inside a file
called access and located in OSSV /snapvault/etc

D. MD5 based authentication
between SnapVault primary and secondary, with changeable password

Which tool is available on
an OSSV client to assist in starting or stopping the OSSV service,
modifying NDMP settings, enabling debugging, and capturing trace files?

A. Operations Manager

B. Protection Manager

C. Svconfigurator GUI

D. svdebug.exe

Which three statements are
true about SnapLock volumes? (Choose three.)

A. SnapMirror supports
SnapLock volumes.

B. There are two types of
SnapLock volumes.

C. SnapLock volumes support
per-file retention periods.

D. In Data ONTAP 7.2.5.1
and later, SnapLock Compliance volumes are not supported on the VSeries
controller with NetApp Storage.

To restore a qtree
protected with SnapVault from the secondary storage system to the primary storage
system, you can ______________. (Choose two.)

A. restore to a non
existing qtree with DOT 7. 2

B. add the new qtree to the
primary storage system with DOT 7.2

C. overwrite the existing
qtree on the primary storage system with DOT 7.3

D. delete the existing
qtree from the secondary storage system with DOT 7.3

The snapvault update command
is only available on the secondary system.

A. True

B. False


Ans. A

The OSSV agent on the
primary system listens to TCP port 10000 for all SnapVault
communications.

A. True

B. False

Which Data ONTAP option
sets system-wide throttling for all transfers?

A. options transfer.wide.enable

B. options
transfer.throttle.enable

C. options
replication.wide.enable

D. options
replication.throttle.enable

The qtree specified for
____ must not exist on the secondary system before you run the ____
command.

A. pri_qtree_path, snapvault
start

B. sec_qtree_path,
snapvault start

C. pri_qtree_path,
snapvault initialize

D. sec_qtree_path,
snapvault initialize

The snapvault restore
command is run on the _________.

A. secondary system to push
data to the primary system

B. primary system to pull
data from the secondary system

C. secondary system to pull
data from the primary system

D. secondary system to push
data to the primary storage system

Which three statements
apply to NearStore Personality license? (Choose three.)

A. It increases the storage
capacity.

B. It converts the
destination storage system to a NearStore system.

C. It requires the
nearstore_option license on the destination storage system.

D. It provides increased
concurrent streams when the storage systems are used as destinations for
SnapMirror and SnapVault transfers.

Which statement applies to
the Open Systems SnapVault Free Space Estimator utility?

A. This utility runs
automatically after each transfer.

B. This utility must be
enabled on the secondary storage system.

C. This utility determines
if there is sufficient disk space available on the primary to perform an OSSV
transfer.

D. This utility determines
if there is sufficient disk space available on the secondary to perform an OSSV
transfer.

The snapvault snap create
volume snapname command can be executed on the ___________.

A. open systems

B. primary system only

C. secondary system only

D. secondary or primary
systems

The SnapVault secondary
system allows you to keep a separate schedule of Snapshot copies
from your primary system.

A. True

B. False

The SnapVault secondary
system allows you to keep a separate schedule of Snapshot copies
from your primary system.

A. True

B. False

The snapvault snap sched -x
command is used to ____________.

A. schedule full backups

B. cancel scheduled backups

C. schedule baseline
transfer

D. schedule incremental
backups

Which action will cause a
currently in-sync SnapMirror relationship to fall out of sync?

A. Running snapmirror
update on the source storage system

B. Running snapmirror
release on the source storage system

C. Modifying the
/etc/snapmirror.conf file for the relationship on the source storage system

D. Modifying the
/etc/snapmirror.conf file for the relationship on the destination storage
system

Which two choices are used
to configure a semi-synchronous SnapMirror relationship? (Choose
two.)

A. throttle

B. visibility interval

C. outstanding=3s in DOT
7.2

D. using option semi-sync
in DOT 7.3 and higher

A NearStore license
increases the amount of concurrent replication streams.

A. True

B. False

Which is true of the
SnapVault backup of a NetApp storage system?

A. The file is the basic
unit for SnapVault backup destination.

B. The qtree is the basic
unit for SnapVault backup destination.

C. The volume is the basic
unit of SnapVault backup destination.

D. The directory is the
basic unit for SnapVault backup destination.

Which option will allow a
storage system to SnapMirror from this source system?

A. snapmirror.access

B. snapmirror.destination

C. options snapmirror.allow
host =

D. options
snapmirror.access host =

SnapMirror will
automatically try to restart a transfer after ___________.

A. an initial transfer is
interrupted

B. a manual update is
interrupted

C. a transfer interrupted
by reboot

D. a scheduled incremental
update is interrupted

Which keyword alone can be
used to convert an asynchronous SnapMirror relationship to a
synchronous SnapMirror relationship?

A. sync

B. cksum

C. src_con

D. outstanding

You have quiesced a
SnapMirror relationship. Which command would re-establish the scheduled
updates?

A. snapmirror restart

B. snapmirror resume

C. snapmirror resync

D. snapmirror update

In a volume SnapMirror
relationship, the source and destination volumes must be the same size.

A. True

B. False

Which two statements apply
to the fs_size_fixed volume option? (Choose two.)

A. The default setting is
on.

B. This option is
automatically set to be on when a volume becomes a SnapMirrored volume.

C. This option turns to off
after the snapmirror break command is issued for the relationship.

D. This option causes the
SnapMirror destination volume to remain the same size and not grow or shrink
when a SnapMirrored volume relationship is broken.

Which three statements
apply to the SnapMirror visibility_interval argument? (Choose three.)

A. The default interval
value is five minutes.

B. The smallest interval
value supported is 30 seconds.

C. This variable controls
the view of the data on the destination system.

D. By setting a value, you
specify the amount of time before an automatic snapshot is created on the
source volume that is synchronously mirrored.