Mta Reviewer

Your boss wants you to connect two of his laptops directly to
each other using their network adapters. What kind of cable should you use?

a. Rolled cable

b. Crossover cable

c. Straight through cable

d. Patch cable

You are making a specialized wired connection for a server that
will operate on an Ethernet network. Which two wiring colors should you use?

a. Orange and green

b. Orange and blue

c. Orange and brown

d. White and blue

One of the network connections to a programmer’s computer has
failed. You suspect it involves a problem with the twisted-pair cable. What
tool should you use to test for any problems in the cable?a. Patch tester

b. Wireshark

c. Continuity tester

d. Fox and hound

The IT director has asked you to connect three new super
computers to the backbone of a network that runs at 1 Gbps. The pressure is on!
What type of cable will be sufficient for this task?

a. Category 3

b. Category 5

c. Category 5e

d. Category 10a

Your network contains many fiber optic connections. Which one of
the following does not belong in your fiber network?

a. FC connector

b. ST connector

c. TOSLINK

d. 8P8C

You need to connect 802.11a, 802.11b, and 802.11n wireless
networks together. What wireless tool will guarantee you connectivity between
these networks?

a. Wireless network adapter

b. Wireless hub

c. Wireless router

d. Wireless bridge

Your boss has asked you to connect three new laptops to the
wireless network “WLAN42.” It runs at a speed of 54 Mbps only and a frequency
of 2.4 GHz only. What IEEE 802.11 standard should you implement when connecting
the laptops to the WAP?a. 802.11a   b. 802.11b

c. 802.11g

d. 802.11n

strongest encryption type possible. Of the following choices,
which is the strongest?

a. WEP

b. RADIUS

c. WPA2

d. WPA

You have connected thirteen PCs and laptops to a wireless
network. To make your WLAN more secure, what should you do to disallow
additional client access to the WAP?

a. Enable channel bonding

b. Enable frame aggregation

c. Disable SSID broadcasting

d. Disable WPA2

The manager of IT asks you to connect a computer to an RJ45
jack. You should use a _________ cable to do so.

A twisted-pair cable was run 140 meters without any repeaters.
Now, the signal cannot be picked up by the destination host. This cable is the
victim of _________.

Your network uses category 3 cabling, but it needs to be
upgraded so that it can support faster 100 Mbps applications. In this
situation, _________ would be the minimum cable needed to accomplish this.

The type of cable known as _________ cable will protect the
copper wires inside the cable from EMI.

Your boss complains about hearing a second conversation when he
is talking on the phone. This is an example of _________.

You need to connect LANs in two buildings in a campus area
network. The buildings are several kilometers apart. You would need _________
fiber optic cable to accomplish this.

Your boss doesn’t know exactly how to do it, but he knows that
he wants port-based authentication for his network. He is searching for a
_________ implementation.

In order to connect to WLANs that are faster than 54 Gbps, you
would need to utilize the IEEE _________ standard.

The _________ wireless encryption mode can be as strong as
256-bit.

A _________ is when two or more wireless clients communicate
directly with each other, without the need for a WAP.

Your client requires that you install 284 computers on a single
IP network. Which of the following IP classes would be your best option?

a. Class A

b. Class B

c. Class C

d. Class D

Your boss wants you to set up three computers on a classful
network with a default subnet mask of 255.0.0.0. What class does he want the
computers to be set up on?

a. Class A

b. Class B

c. Class C

d. Class D

Proseware, Inc., needs you to set up 100 computers on a private
Class A network. Which of the following IP network numbers meet all of the
criteria for a private Class A network?

a. 100.10.1.0

b. 192.168.1.0

c. 172.16.0.0

d. 10.0.0.0

You need to subnet a 192.168.1.0 network. You decide to use the
255.255.255.240 subnet mask. What is 240 equal to in binary?

a. 11100000

b. 11000000

c. 11110000

d. 10000000

The IT director has asked you to set up 14 separate IP networks
that can each have up to 400 computers. What IANA private IP range should you
select?

a. 10.0.0.0–10.255.255.255

b. 172.16.0.0–172.31.255.255

c. 192.168.0.0–192.168.255.255

d. 169.254.0.0–169.254.255.255

You need to connect 802.11a, 802.11b, and 802.11n wireless
networks together. What wireless tool will guarantee connectivity between these
networks?

a. Wireless network adapter

b. Wireless hub

c. Wireless router

d. Wireless bridge

Your boss’s computer cannot connect to the Internet. Examine the
following ipconfig results and select the best answer explaining why this has occurred.
IPv4 Address. . . . . . . . . . . : 10.254.254.1

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 10.254.254.255

a. The subnet mask is incorrect.

b. The IP address is incorrect.

c. The default gateway is incorrect.

d. The subnet mask and the IP address are incorrect.

You have installed a device that has two IP addresses. One
address, 64.51.216.27, is displayed to the Internet. The other address,
192.168.50.254, communicates with the LAN. What type of technology have you
implemented?

a. Subnetting

b. IPv6

c. Network address translation

d. Class A public IP address

The manager of IT asks you to subnet a group of computers on the
192.168.50.0/28 network. This will provide you with _________ number of
subnets.

Your network uses the subnetted IP network 192.168.100.0/26. Its
subnet mask is _________.

You are troubleshooting an IP network with the following number:
10.254.254.0/24. This type of IP network number is known as _________.

Your boss worries about how many IPv4 addresses are left and
inquires about installing IPv6. Whereas IPv4 is a 32-bit system, IPv6 is a
_________-bit system.

A client wants you to set up a group of IPv6 network interfaces
in such a way that each of them will have all packets delivered to them. Here,
you should implement a _________ address.

You are troubleshooting a server that needs to connect directly
to the Internet. After you run an ipconfig/all, you see that the server has
been auto-assigned the IPv6 address fe80::260:8ff:fec0:98d%4. The server won’t
connect to the Internet due to the fact that this is a _________ address.

To save time when working with IPv6 addresses in the command
line, you like to truncate them. The truncated version of
2001:4860:0000:2001:0000:0000:0000:0068 would be _________.

You see an IPv6 address displayed as fe80::5efe:10.0.0.2%2. This
is an example of _________.

You are troubleshooting a client’s network. The client is using
the following IP network scheme: IP network: 192.168.50.0 Subnet mask:
255.255.255.240 The client has 196 computers that are functioning properly, but
another 30 computers will not connect to the network. This is because
_________.

You are troubleshooting a network connectivity problem and see
the command results listed here. What command was typed to acquire these
results? Request timed out. Request timed out. Request timed out. Request timed
out.Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

a. ipconfig

b. netstat

c. ping

d. nbtstat

You are told to determine the MAC address of a Windows computer.
Which command should you use to find this information?

a. ipconfig

b. ipconfig /all

c. ipconfig /release

d. ipconfig /flushdns

The IT director has asked you to ping a computer continuously.
Which of the following is the best command to use?

a. ping -n

b. ping -t

c. ping -l

d. ping 127.0.0.1

You are troubleshooting a computer that cannot obtain the proper
IP address from a DHCP server. Of the following commands, which should you try
first?

a. ipconfig /release

b. ipconfig /renew

c. ipconfig /displaydns

d. ipconfig /source=dhcp