The flashcards below were created by user
wraith75
on FreezingBlue Flashcards.
-
Most fire departments use what four basic management principles?
- -Discipline
- -Division of labor
- -Chain of command
- -Unity of command
-
T/F Freelancing isn't acting independently of a superiors orders or the FD SOP's?
False
-
What is the NFPA standard on "Protective Ensemble for Structural Firefighting"?
NFPA 1971
-
What is the percent of oxygen concentrations for the following symptoms?
-HA and nausea
-Cardiac arrest
-Unconscious
-Normal breathing
-Judgement impaired
-
Who is in the general staff?
-
What are 3 major components of smoke?
-
What are the 3 modes of heat transfer?
- Radiation
- Convection
- Conduction
-
What are the 5 classes of fire?
- A- ordinary combustibles
- B- flammable liquids
- C- electric
- D- metal
- K- grease
-
What are the phases of fire?
-
What is Spalling?
Trapped moisture in concrete that is converted to steam by fire, causing sections to explode rapidly
-
What are the 5 types of construction?
-
What does PASS stand for?
-
What are the elements of a knot?
Bend, Loop, Round turn
-
What are the 3 types of high rise alarms?
-
What are the normal parts of door construction?
- Locking device
- Door
- Jamb
- Hardware
-
How many 24 hr shifts can someone use for bereavement?
-
What are the phases of progressive discipline?
-
What is the proper ground ladder angle for most ground ladder operations?
70%
-
What is the proper ground ladder angle for rescue or rapid escape?
60%
-
What is the rated capacity and safety factor for the fire service ladders?
750 lbs, 4:1
-
According to what NFPA standard are ground ladders to be tested annually?
NFPA 1932
-
Heat sensor labels turn what color and at what temp on ground ladders?
Black at 300 degrees F.
-
Once aluminum ground ladder materials reach ____ the ladder materials may have lost at least ___ % of the load capacity?
300 degrees F, 25%
-
What is the rule to use to determine if a wall that is warm to the touch needs to be opened?
15 sec / 2 min rule
-
What benchmark is transmitted to IC upon completion of loss control activities?
Loss stopped
|
|