-
How do you open the Gate?
Use the
"Walk Gate Latch"
-
What does the gate hang on?
Male Hinge
-
How does the gate hang on the post?
Female Hinge
-
Where does the Rail End band go?
It couples itself around the terminal post & attaches to the rail end cup.
-
Where does the "terminal post cap" go?
On top of the terminal post cap.
-
What does a "rail end cup" do?
Insert the top rail into the cup so it connects to the terminal post.
-
What does the tension band do?
Attaches to the terminal post, and with nuts & bolts the chain link and tension bar are bolted to it.
-
What is the line post cap?
It attaches to the line post, and the top rail passes through it.
-
What do "tie wires," do?
They tie down the chain link to the top bar & line posts. There are 9 used per section.
Wraps are placed 12" apart on the line posts and 24" apart on the top rail.
-
What attaches to the terminal post?
Male Hinge, Rail End Band, Terminal Post Cap, and Tension Band.
-
What does the Tension Bar do?
Weaves through chain link, allows for attachment to the tension bands.
-
Where does the line post go?
Post placed in between sections.
-
What is the top rail for?
Rail that spans section out. Attaches top of chain link to top rail with the use of Tie Wires.
-
Carriage Bolt 5/16" x 1 1/4"
Where does this go?
Between the Tension & Rail End Band.
-
What is the grade (ground line) on the terminal posts?
How deep should the post be dug?
- Measure from the top down, add 2" to the height of the post.
- (Height of fence + 2" = grade mark)
18-30" Deep & 8" Wide
-
What is the grade (ground line) on the line posts?
How deep should the post be dug?
- Measure from the top down, subtract 2" from the height of the post.
- (Height of fence - 2" = grade mark)
18-24" Deep & 8" Wide
|
|
