Skiold Disc mills

1. SK 2500 with 5.5 kw or a 7.5 kw. motor

2. SK 5000 with a 15 kw or a 22 kw

3. SK10T with a 55 kw motor

1. on fount of disc mill there is a handal to manually change.

2. you can automatically us the actuator that receives the settings from the control plant.

They all have the same RPM

• Note: RMP 2800
• To incress the processing speed they have put larger dics and motors on the larger disc mills. you can allso add a small ager at intake to push feed in .

 

tt

450 mm

The disc mill may be used for grinding of ordinary cleaned small-grained seed crops in storage dry conditionand with a maximum diameter of 8 mm. Wheat, barley etc. can furthermore be ground from gas proof silowith up to 25% moisture content. However, please note that the capacity is reduced by approx. 5% for eachpercentage of moisture content higher than 15% - for example 18% moisture content reduces the capacity by(18-15) x 5 = 15%.The disc mill is also suitable for granulation of clean pelleted feed products, and sawdust, with a pelletdiameter of up to Ø 12 mm.

• Bottem
• 

• Magnet
• 

nb

Brass goes on the bottom.

• the gears
• one with a shaft and one with out.

Fixed plat.

• the aluminium block for the zero point is in the middle of the screw.
• 

• pin must be to the side
• 

order of spacers for the rod that holds the potention meater

Adjust the potent-ion meter to .74