small office internet connection

Home

Get App

Take Quiz

Create

What does SDM stand for?

Security Device Manager
What O/S runs first when powering up an SDM device for the first time?

SDM express
What steps must you use to first configure your SDM device?
- 1. Connect crossover cable to gigabit 0/0 to nic on your pc.
- 2. set your PC ip addrss to 10.10.10.2 255.255.255.248
- 3. open web browser to 10.10.10.1
What is the default username and password for your SDM device?

cisco and cisco
What is level_15 access?

Same as Privileged Exec Mode.
Can PAT be configured using SDM express interface?

no
Does SDM full support PAT?

yes
Do you need to configure a default route for SDM devices?

yes
How do you test internet connectivity usined the SDM interface?
- 1. At the SDM home page, click the monitor button at the top
- 2. click the interface status
- 3. In the list of interfaces, choose the interface that has internet connectivity
- 4. click the test connection button
What button do we click to access the DHCP settings?

Additional Tasks
What steps should you take when configuring a new switch?
- Configure an IP address and subnet mask
- default gateway
- apply passwords
- restrict remote access to SSH
What port do we use to configure a switch for the first time?

Console port
What type of cable is used to configure a switch for the first time?

Console cable
What settings do we use when establishing a connection with a switch through the colsole port?
- baud = 9600
- data bits = 8
- stops bits = 1
- no parity
- Flow Control os Off
What commands are used to configure your switch for first time use?
- interface vlan1
- ip address [ip address] [subnet mask]
- no shut
- exit

Author

gbird

201411

Card Set

small office internet connection

Description

small office internet connection

Updated

2013-02-18T13:05:04Z