-
Straightness
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Form
Definition: Straightness is a condition in which the elements of a surface or its axis are in a straight line.
-
Flatness
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Form
- Definition: Flatness is a condition in which all elements are in one plane.
-
Circularity
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Form
- Definition: Circularity refers to a condition of a circular line or the surface of a circular feature where all points on the line or on the circumference of a plane cross section of the feature are the same distance from a common axis or center point.
-
Cylindricity
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Form
- Definition: Cylindricity is a condition of a surface in which all points of the surface are the same distance from a common axis
-
Profile of a Line
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Profile
- Definition: A Profile of a Line tolerance may be directed to a line of any length or shape.
-
Profile of a Surface
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Profile
- Definition: Profile of a Surface indicates a tolerance zone having the same form as the basic surface, with a uniform width equal to the specified tolerance within which the entire surface must lie.
-
Perpendicularity
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Orientation
- Definition: Perpendicularity is the condition of a surface at 90° to a datum plane or axis.
-
Angularity
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Orientation
- Definition: Angularity is a condition of a surface or axis at a specified angle (other than 0° or 90°) for a datum.
-
Parallelism
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Orientation
- Definition: Parallelism is the condition of a surface equidistance at all points from a datum plane.
-
Symmetry
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Location
- Definition: ?
-
Position
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Location
- Definition: Position defines a zone within which the center, axis, or center plane of a feature or size is promitted to very from the true position.
-
Concentricity
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Location
- Definition: ?
-
Circular Runout
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - Type of Tolerance: Runout
- Definition: Circular Runout provides control of circular elements of a surface. The tolerance is applied independently at any cross section as the part is rotated 360°.
-
Total Runout
Symbol: ?
Type of Tolerance: _____
Definition: _____
- Symbol:
 - T.o.T.: Runout
- Definition: Total Runout concerns the runout of a complete surface, not merely the runout of each circular element.
|
|