2ax7x

The flashcards below were created by user smith0623 on FreezingBlue Flashcards.

  1. Which type of maintenance ensures that equipment is ready and available at the time of need?
    A. On-equipment.
    B. Preventive.
    C. Off-equipment.
    D. Corrective.
    B. Preventive
    (this multiple choice question has been scrambled)
  2. Which of the following is used to highlight trends, benchmarks, or safety conditions relating to maintenance equipment, personnel, training, or processes?
    A. Technical orders.
    B. National stock numbers.
    C. Self-inspections.
    D. Cross-tells.
    D. Cross-tells
    (this multiple choice question has been scrambled)
  3. Who is the office of primary responsibility (OPR) for the Intermediate Repair Enhancement Program?
    A. Wing vice-commander.
    B. Wing commander.
    C. Maintenance group superintendent.
    D. Maintenance group commander.
    D. Maintenance group commander.
    (this multiple choice question has been scrambled)
  4. All requests for depot level assistance must be coordinated through
    A. Plans, Scheduling, and Documentation and the Maintenance Group commander.
    B. Quality Assurance and Maintenance Management Analysis.
    C. Plans, Scheduling, and Documentation and Maintenance Management Analysis.
    D. Quality Assurance and Plans, Scheduling, and Documentation.
    D. Quality Assurance and Plans, Scheduling, and Documentation.
    (this multiple choice question has been scrambled)
  5. What do you call wing-level maintenance facilities providing intermediate-level maintenance repair support for multiple Air Force units within a particular theater of operations?
    A. Programmed Depot Maintenance.
    B. Centralized Repair Facilities.
    C. Intermediate Repair Enhancement Program.
    D. Regional Repair Centers.
    B. Centralized Repair Facilities.
    (this multiple choice question has been scrambled)
  6. Which maintenance capability category is performed at backshop level and consists of off-equipment maintenance?
    A. Depot.
    B. Organizational.
    C. Intermediate.
    D. Two-level maintenance.
    C. Intermediate.
    (this multiple choice question has been scrambled)
  7. Which category of Deficiency Report should you submit if the equipment has a deficiency that if uncorrected, may cause major loss or damage to equipment and no workaround is known?
    A. 2B.
    B. 2A.
    C. 1A.
    D. 1B.
    D. 1B
    (this multiple choice question has been scrambled)
  8. Which Maintenance Group agency provides technical assistance for Deficiency Reports to work center supervisors?
    A. Plans, Scheduling, and Documentation.
    B. Maintenance Supply Liaison.
    C. Programs and Resources Flight.
    D. Quality Assurance.
    D. Quality Assurance
    (this multiple choice question has been scrambled)
  9. Which of the following is used to assign responsibilities, direct actions, and prescribe procedures within a subordinate function (i.e., a staff office, a branch, asquadron, etc.)?
    A. Operating instructions.
    B. Air Force instructions.
    C. Support agreements.
    D. Technical orders.
    A. Operating instructions.
    (this multiple choice question has been scrambled)
  10. When Operating Instructions (OI) apply to multiple groups, they should be published as
    A. wing OIs.
    B. Air Force instructions.
    C. separate group OIs.
    D. support agreements.
    A. wing OIs.
    (this multiple choice question has been scrambled)
  11. Which AFTO IMT is used to maintain a permanent history of significant maintenance actions on end-items of equipment?
    A. 95.
    B. 781 series.
    C. 427.
    D. 244.
    A. 95.
    (this multiple choice question has been scrambled)
  12. What program promotes identifying and correcting system deficiencies before they affect combat capability?
    A. Intermediate Repair Enhancement.
    B. Quality Assurance.
    C. Programmed Depot Maintenance.
    D. Reliability and Maintainability.
    D. Reliability and Maintainability.
    (this multiple choice question has been scrambled)
  13. What AFTO IMT is used to document accumulated cycles, operating time, and maintenance history, as well as pertinent manufacturing data for jet engine turbine wheels?
    A. 781J.
    B. 245.
    C. 244.
    D. 95.
    D. 95
    (this multiple choice question has been scrambled)
  14. Which Integrated Maintenance Database System-Central Database (IMDS-CDB)subsystem provides the capability to track engines and their components for time-changes and inspections and establishes and maintains the installed-on relationship between and components?
    A. Job Data Documentation.
    B. Status and Inventory Reporting.
    C. C-E Equipment Status.
    D. Comprehensive Engine Management System.
    D. Comprehensive Engine Management System.
    (this multiple choice question has been scrambled)
  15. Printed copies of the AFTO IMT 95 are not required to accompany end items upon transfer
    A. in units where jet engines, jet engine adjustable nozzles, or thrust reversers areinvolved in frequent rotation from one aerospace vehicle to another.
    B. as long as an entry has been made in the necessary maintenance information systemverifying that the basic items have been accounted for.
    C. in the case of helicopter blades and tail rotor blades being transferred into the disposalsystem.
    D. to/from locations that have access to the necessary maintenance information systems toretrieve the historical information.
    D. to/from locations that have access to the necessary maintenance information systems toretrieve the historical information.
    (this multiple choice question has been scrambled)
  16. Which Integrated Maintenance Database System-Central Database (IMDS-CDB)subsystem allows users to track maintenance actions and has both maintenance and supply data?
    A. Job Data Documentation.
    B. Operational Events.
    C. Maintenance Events.
    D. Aircraft Automated Forms 781A, J, K.
    C. Maintenance Events
    (this multiple choice question has been scrambled)
  17. Which Integrated Maintenance Database System-Central Database (IMDS-CDB)subsystem replaces the Maintenance Data Collection (MDC) system and provides maintenance personnel with the online capability to document, inquire, and produce retrievals of maintenance actions?
    A. Job Data Documentation.
    B. Operational Events.
    C. Maintenance Events.
    D. Aircraft Automated Forms 781A, J, K.
    A. Job Data Documentation.
    (this multiple choice question has been scrambled)
  18. Who guides the overall Data Integrity Team process and ensures the data provided to maintenance managers and supervision is meaningful and factual?
    A. Every user.
    B. Programs and Resources.
    C. Plans, Scheduling, and Documentation.
    D. Maintenance Management Analysis.
    D. Maintenance Management Analysis.
    (this multiple choice question has been scrambled)
  19. In addition to being familiar with the unit’s assigned weapon system(s), squadron representatives for the Data Integrity Team must be at least
    A. a non-commissioned officer.
    B. a senior Airman.
    C. a 5-level.
    D. a 7-level.
    C. a 5-level.
    (this multiple choice question has been scrambled)
  20. What provides a measurement of unit performance and capability?
    A. Instructions.
    B. Reports.
    C. Standards.
    D. Metrics.
    D. Metrics
    (this multiple choice question has been scrambled)
  21. What are the two most common types of primary maintenance metric indicators?
    A. Performance and health.
    B. Leading and lagging.
    C. Trending and impacting.
    D. Positive and negative.
    B. Leading and lagging.
    (this multiple choice question has been scrambled)
  22. Which primary maintenance metric indictor shows problems first, as they directly impact maintenance’s capability to provide resources to execute the mission?
    A. Impacting.
    B. Leading.
    C. Trending.
    D. Lagging.
    B. Leading
    (this multiple choice question has been scrambled)
  23. Which primary maintenance metric indictor shows and follows firmly established trends?
    A. Lagging.
    B. Trending.
    C. Leading.
    D. Impacting.
    A. Lagging
    (this multiple choice question has been scrambled)
  24. Which maintenance repair priority is designated only for aircraft that are on alert status or aircraft that are supporting the war plan or national emergency missions?
    A. 3.
    B. 1.
    C. 4.
    D. 2.
    B. 1
    (this multiple choice question has been scrambled)
  25. Who is responsible for establishing a crashed, damaged, or disabled aircraft recovery program?
    A. Wing vice-commander.
    B. Wing commander.
    C. Maintenance Group deputy commander.
    D. Maintenance Group commander.
    B. Wing commander
    (this multiple choice question has been scrambled)
  26. Who is personally responsible for managing the Foreign Object Damage and Dropped Object Prevention programs?
    A. Wing vice-commander.
    B. Maintenance group deputy commander.
    C. Maintenance group commander.
    D. Wing commander.
    A. Wing vice-commander
    (this multiple choice question has been scrambled)
  27. Who is responsible for standardizing maintenance discipline, procedures, organizational structures, compliance, and management philosophy?
    A. Maintenance group deputy commander.
    B. Maintenance group commander.
    C. Production superintendent.
    D. Wing commander.
    B. Maintenance group commander.
    (this multiple choice question has been scrambled)
  28. Who is responsible for chairing the daily maintenance production/scheduling meeting with representatives from throughout the maintenance group (MXG)?
    A. Wing vice-commander.
    B. MXG commander.
    C. MXG deputy commander.
    D. MXG superintendent.
    C. MXG deputy commander
    (this multiple choice question has been scrambled)
  29. Who oversees the management of maintenance facilities and aircraft support equipment procurement and maintenance?
    A. Maintenance Supply Liaison.
    B.Maintenance group deputy commander.
    C. Programs and Resources Flight.
    D. Maintenance group superintendent
    D. Maintenance group superintendent
    (this multiple choice question has been scrambled)
  30. Who is held legally responsible for their unit’s Environmental Protection Agency program compliance in accordance with AFI 32–7042, Waste Management?
    A. Flight commanders.
    B. Squadron commanders.
    C. Maintenance operations officers.
    D. Maintenance group commanders.
    B. Squadron commanders.
    (this multiple choice question has been scrambled)
  31. Which commander is tasked with developing and publishing the wing flying/maintenance schedule in coordination with other squadron maintenance operations officers/maintenance superintendents?
    A. Maintenance operations squadron.
    B. Aircraft maintenance squadron.
    C. Maintenance squadron.
    D. Maintenance operations flight.
    D. Maintenance operations flight.
    (this multiple choice question has been scrambled)
  32. Worker safety and health information must be monitored, tracked, and documented using what AF IMT?
    A. 55.
    B. 435.
    C. 244.
    D. 623.
    A. 55
    (this multiple choice question has been scrambled)
  33. Section non-commissioned officers-in-charge are responsible for developing cross utilization training requirements, ensuring they do not interfere with
    A. scheduled maintenance actions.
    B. accountability and control procedures.
    C. qualification and upgrade training.
    D. deployments and wing-level taskings.
    C. qualification and upgrade training.
    (this multiple choice question has been scrambled)
  34. Section non-commissioned officers-in-charge must ensure their sections are organized with tools, equipment, and material as close to the Point of Maintenance without jeopardizing
    A. maintenance and flying schedules.
    B. accountability and control procedures.
    C. proper maintenance techniques.
    D. qualification and upgrade training.
    B. accountability and control procedures.
    (this multiple choice question has been scrambled)
  35. When a maintenance squadron production superintendent is appointed, who must he or she inform of specialist non-availability to at the beginning of each shift?
    A. Maintenance Operation Center.
    B. Group manning manager.
    C. Squadron commander.
    D. Aircraft maintenance unit production superintendents.
    A. Maintenance Operation Center.
    (this multiple choice question has been scrambled)
  36. How many standard squadrons are in a maintenance group?
    A. 8.
    B. 3.
    C. 5.
    D. 2.
    B. 3
    (this multiple choice question has been scrambled)
  37. Which Maintenance Operations Squadron flight is a centrally located agency responsible for monitoring and developing long-range strategies to sustain fleet health?
    A. Maintenance Operations Center (MOC).
    B. Maintenance Operations (MOF).
    C. Maintenance Training Flight (MTF).
    D. Programs and Resources.
    B. Maintenance Operations (MOF).
    (this multiple choice question has been scrambled)
  38. The Maintenance Operations Center is responsible for the overall management of which Integrated Maintenance Data System-Central Database (IMDS-CDB) subsystem?
    A. Location.
    B. Maintenance Events.
    C. Operational Events.
    D. Status and Inventory Reporting.
    A. Location.
    (this multiple choice question has been scrambled)
  39. Which section is the wing focal point for engine health tracking and the engine health management program?
    A. Engine Management.
    B. Jet Engine Intermediate Maintenance.
    C. Maintenance Operations Center.
    D. Aircraft Maintenance Unit Specialist Section.
    A. Engine Management.
    (this multiple choice question has been scrambled)
  40. Which Maintenance Operation Squadron section maintains standardized aircraft jacket files and attends pre-dock and post-dock inspection meetings?
    A. Maintenance Management Analysis.
    B. Production Superintendent.
    C. Maintenance Operations Center.
    D. Plans, Scheduling, and Documentation.
    D. Plans, Scheduling, and Documentation.
    (this multiple choice question has been scrambled)
  41. The Maintenance Training Flight normally consists of what two sections?
    A. Training Management; Development and Instruction.
    B. Training Development; Instruction Management.
    C. Training Detachment; Training Management.
    D. Education and Training; Development and Instruction.
    A. Training Management; Development and Instruction.
    (this multiple choice question has been scrambled)
  42. What agency’s basic mission is to launch and recover aircraft and to perform the necessary servicing, inspections, and maintenance to perform daily aircraft flying operations?
    A. Maintenance Flight.
    B. Maintenance Operations Squadron.
    C. Transient Alert.
    D. Aircraft Maintenance Unit.
    D. Aircraft Maintenance Unit.
    (this multiple choice question has been scrambled)
  43. Which of the following is not a section within a standard aircraft maintenance unit?
    A. Aircraft.
    B. Debrief.
    C. Supply.
    D. Weapons.
    C. Supply.
    (this multiple choice question has been scrambled)
  44. What does the Debrief section use to help identify fault codes to aid maintainers in aircraft troubleshooting?
    A. Fault Isolation manuals.
    B. Landing status codes.
    C. Fault Reporting manuals.
    D. System capability codes.
    C. Fault Reporting manuals.
    (this multiple choice question has been scrambled)
  45. Who must ensure the applicable aircraft form sets are provided to the Debrief section by the end of the flying day if debriefs are suspended due to aircraft flying surge operations?
    A. Aircraft section chief or Production Superintendent.
    B. Weapons expediter or Specialist expediter.
    C. Flight-line expediter or Production Superintendent.
    D. Flight-line expediter or Aircraft section chief.
    C. Flight-line expediter or Production Superintendent.
    (this multiple choice question has been scrambled)
  46. The Aircraft section is split into two separate sections when an Aircraft Maintenance Unit’s number of mission assigned aircraft is more than
    a. 14.
    b. 16.
    c. 18.
    d. 20.
    c. 18.
  47. Which section is normally responsible for aircraft troubleshooting, on-equipment repairs, component removal and installation, reprogramming avionics systems, and classified aircraft items management?
    A. Avionics.
    B. Aircrafts.
    C. Communication-Navigation.
    D. Specialist.
    D. Specialist.
    (this multiple choice question has been scrambled)
  48. Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire suppression,and oxygen systems, including removing and replacing associated system components?
    A. Crew chiefs.
    B. Avionics specialists.
    C. Propulsion specialists.
    D. Electro-environmental specialists.
    D. Electro-environmental specialists.
    (this multiple choice question has been scrambled)
  49. Who is responsible to the Weapons section chief for monitoring all armament systems maintenance and loading operations?
    A. Dedicated crew chief.
    B. Weapons expediter.
    C. Flight-line expediter.
    D. Load crew chief.
    B. Weapons expediter.
    (this multiple choice question has been scrambled)
  50. Which section is tasked with the maintenance, control, and storage of alternate mission equipment, dash–21 equipment, and maintenance, safety, and protective equipment?
    A. Weapons section.
    B. Armament Support section.
    C. Aircraft section.
    D. Support section.
    D. Support section.
    (this multiple choice question has been scrambled)
  51. Which of the following is not a standard flight in the maintenance squadron?
    A. Armament.
    B. Egress.
    C. Propulsion.
    D. Fabrication.
    B. Egress.
    (this multiple choice question has been scrambled)
  52. Commanders have the option of establishing two separate squadrons, the Equipment Maintenance Squadron and the Component Maintenance Squadron, if maintenance squadron manning authorizations exceed
    A. 670.
    B. 760.
    C. 600.
    D. 700.
    D. 700.
    (this multiple choice question has been scrambled)
  53. In relation to aerospace ground equipment, what are centrally located to enhance mission performance?
    A. Drivers.
    B. AFTO IMT 244s.
    C. Driver radios.
    D. Sub-pools.
    D. Sub-pools.
    (this multiple choice question has been scrambled)
  54. Which Avionics Flight section is responsible for performing off-equipment maintenance on systems such as all-weather landing, attitude reference and bombing, and inertial navigation?
    A. Avionics Intermediate.
    B. Sensors.
    C. Guidance and Control Systems.
    D. Communication-Navigation.
    C. Guidance and Control Systems.
    (this multiple choice question has been scrambled)
  55. Which Avionics Flight section is responsible for maintaining low-altitude navigation and targeting infrared for night (LANTIRN) pods?
    A. Communication-Navigation.
    B. Avionics Intermediate.
    C. Sensors.
    D. Guidance and Control Systems.
    C. Sensors.
    (this multiple choice question has been scrambled)
  56. Which Fabrication Flight section’s processes are tightly controlled because the parts and tools they manufacture must meet the stringent standards of aerospace-grade equipment?
    A. Aircraft Structural Maintenance.
    B. Non-Destructive Inspection.
    C. Metals Technology.
    D. Low Observable.
    C. Metals Technology.
    (this multiple choice question has been scrambled)
  57. If a Refurbishment section is established, wings have the option to align it under either the Maintenance Flight or the
    A. Two-level Maintenance Flight.
    B. Aircraft Inspection Flight.
    C. Accessories Flight.
    D. Fabrication Flight.
    D. Fabrication Flight.
    (this multiple choice question has been scrambled)
  58. Which Munitions Flight section receives, stores, warehouses, handles, inspects, ships, inventories, and transports containers, dispensers, and training items?
    A. Systems.
    B. Material.
    C. Support.
    D. Production.
    B. Material.
    (this multiple choice question has been scrambled)
  59. Which Propulsion Flight section stores, builds up, tears down, modifies, and repairs engines, quick engine change kits, and test components?
    A. Module/Accessory Repair.
    B. Jet Engine Intermediate Maintenance.
    C. Small Gas Turbine Engine.
    D. Engine Equipment Maintenance.
    B. Jet Engine Intermediate Maintenance.
    (this multiple choice question has been scrambled)
  60. The Test, Measurement, and Diagnostic Equipment (TMDE) Flight maintains, calibrates, and certifies TMDE through the
    A. Precision Measurement Equipment Laboratory.
    B. geographically separated units.
    C. Rapid Assistance Support for Calibration.
    D. Air Force Primary Standards Laboratory.
    D. Air Force Primary Standards Laboratory.
    (this multiple choice question has been scrambled)
Author
ID
183396
Card Set
2ax7x
Description
vol 1 ure
Updated
Show Answers