WAN Q8

Refer to the NAT configuration shown below. Match the address type with the correct address(es)?

R1(config)#access-list 1 permit 192.168.10.0 0.0.0.255
R1(config)#ip nat pool PATPOOL 209.165.2.34 209.165.2.35 overload
R1(config)#interface fa0/0
R1(config-if)#ip nat inside
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config)#interface serial 0/0/0
R1(config-if)#ip address 209.165.2.33 255.255.255.240
R1(config-if)#ip nat outside

Address:
192.168.1.1
192.168.10.2
192.168.10.3
209.165.2.33
209.165.2.34
209.165.2.35

Address Type:
interface address
inside local address
inside global address

Identify 3 private addresses from the followings addresses. (Choose 3.)

a) 193.168.255.254
b) 10.255.255.1
c) 1.1.1.1
d) 192.168.255.254
e) 172.32.255.254
f) 172.31.255.1

Refer to the figure shown. Web Server 1 is assigned a single IP address of 192.168.14.5/24. In order for hosts from the Internet to access Web Server 1, which NAT configuration is required on Router 1?


 
A) Port Forwarding
B) static NAT
C) NAT Overload
D) Dynamic NAT

Refer to the figure shown. Which addresses will be translated by NAT? 



A) only host 209.165.200.255
B) 10.1.1.2 - 10.1.1.255
C) only host 10.1.1.2
D) 192.168.0.0 - 192.168.0.255
E) 209.165.200.240 -  209.165.200.255

Refer to the figure shown. Which host or hosts will have their addresses translated by NAT? 



A) 192.168.0.100
B) all hosts on the 10.1.1.0 network
C) 209.165.200.2
D) all hosts on the 192.168.0.0 network
E) 10.1.1.2

The figure shows the debug output from a Cisco router. What kind of address is 24.74.237.203? 



A) outside global
B) inside global
C) outside local
D) inside local

Which NAT solution allows internal hosts to access the Internet if the number of the internal hosts exceed the number of public addresses allocated to the company?

A) NAT Overload
B) Dynamic NAT
C) Port Forwarding
D) static NAT

Which of the following are two characteristics of Dynamic NAT? (Choose two.)

a) assigns the translated addresses of IP hosts from a pool of public addresses where each public address can only be used by a single host.
b) can map multiple addresses to a single address of the external interface
c) maximum number of translated hosts is equal to number of public IP addresses in the pool
d) provides one-to-one fixed mapping of local and global addresses
e) allow external hosts to establish sessions with an internal host
f) assigns unique source port numbers of an inside global address on a session-by-session basis

Which of the following are two characteristics of Static NAT? (Choose two.)

a) assigns the translated addresses of IP hosts from a pool of public addresses where each public address can only be used by a single host.
b) provides one-to-one fixed mapping of local and global addresses
c) allow external hosts to establish sessions with an internal host
d) maximum number of translated hosts is equal to number of public IP addresses in the pool
e) can map multiple addresses to a single address of the external interface
f) assigns unique source port numbers of an inside global address on a session-by-session basis

Which of the following are two characteristics of NAT with Overload? (Choose two.)

a) maximum number of translated hosts is equal to number of public IP addresses in the pool
b) provides one-to-one fixed mapping of local and global addresses
c) allow external hosts to establish sessions with an internal host
d) assigns the translated addresses of IP hosts from a pool of public addresses where each public address can only be used by a single host.
e) assigns unique source port numbers of an inside global address on a session-by-session basis
f) can map multiple addresses to a single address of the external interface