The two general types of exhaust systems used on reciprocating aircraft engines are:
_______ allow for expansion and contraction of the exhaust system.
The purpose of the ______ surrounding the muffler is to capture heat for other systems
Spring Loaded ______ _______ allow for movement without leakage,and slight misalignment of exhaust components.
Exhaust _______ use the velocity of the exiting exhaust gases to produce a venturi effect.
Exhaust system parts should never be marked with a ____ pencil.
A crack on an exhaust system component will often show as a _____ gray or ____ black streak on the outside of the part.
Exhaust system failure almost always creates what hazards?
Carbon build up in the waste gate unit of a turbocharger engine is often referred to as _____ deposits.
A turbocharger system places a _____(Higher or Lower) pressure on the exhaust components.
back of book