-
How many persons are needed to move aircraft?
Six, - PC, Tow tractor driver, brake rider, two wing walkers, and safety observer.
-
How many persons are needed to move A/C without brakes?
Permission is needed form MO. Usually Five
-
How will the move crew carry their whistles?
In their mouths at all times during the move.
-
During night moves, what additional tools are necessary to move A/C safely?
Wands for the PC, and reflective vest for the PC.
-
Can the pilot ride brakes?
Yes, as long as they are included in the safety brief.
-
How far should the wing walkers be from the wheel when moving A/C?
At least there height.
-
What hydralic fluid do we use?
MIL-PRF- 83282 ( 83 to 82 basketball score)
-
What needs to be done before using HSU-1 or T-6?
Pre-op / particle counter.
-
What engine oil do we use?
MIL-PRF-23699 ( MJ 69 9 girls)
-
How do you document engine servicing?
In ounces.
-
What gearbox oil do we use?
DOD-L-85734 ( Song 857 34)
-
How do you document gearbox serviciing?
In inches.
-
Can you complete turn around insection with tail pylon folded?
No, because of the IGB and TGB
-
Can you perfrom daily and Turnaround insection simultaneously?
No.
-
How many people needed to fold a tail pylon?
Five. 3 on pole, one on stab, and one on wrench man.
-
How many gauges are there on the main rotor head?
Two. One hydraulic (color coded in red,green, and yellow) and one for nitrogen (In numbers).
-
How fast do you move an aircraft?
5 MPH or as slow as the slowest walker.
-
Where can you find instruction on how to wash an aircraft?
GAI-010
-
How would you protect viscous damper berfore washing A/C?
By wrapping them with barrier paper and pressure sensitive tape.
-
What is the mixture of soap and water for normal wash?
4 to 1
-
What is an IRAC?
Interim Rapid Action Change, change to manual.
-
On MRC cards, what does a bold C mean?
A corrosion inspection needs to be perfermed.
-
What is the corrosion manual?
NA 01-1A-509 ( Like 409 cleaner)
-
What is the first step in preventing aircraft corrosion?
Aircraft cleanliness.
-
Who is responsible in preventing corrosion?
All hands.
-
What is the drop dead date on any corrosion gripe?
Next 28 day inspection.
-
What does a popped PDI indicate?
A clogged filter.
-
How many PDI's are there? Name them?
14, 2 on each hydrualic pump, 1 on pilot assist module, 2 on each engine, 1 on MGB.
-
What is the APU pressure?
2700 - 3100. (27-31 MILF Age)
-
What is the waiting time between each blade fold and spread cycle, and why?
10 minutes, to avoid burning the motor.
-
What kind of tow bar do we use?
Albar 24
-
What is the only shear wire method authorized?
Single strand
-
What is the waiting time, after APU shut down, for checking APU servicing?
20 minutes
-
What is the waiting time for fuel samples?
2 hours after moving aircraft.
-
What is the capacity of the rescue hoist?
600 lbs.
-
What are the DTA Hazmat requirements?
Fluid film liquid A, A/C cleaning compound 85570, CPC type II, Tail greese, Bifilar grease.
-
What switches are required for flight light?
Stab lock pin. Tail Lock Pin. Blade Fold. Tail Inoexer.
-
What inspection in the daily requires a 10X magnifying glass?
Blade Tip Cap Screws
-
What is used to lubricate the exposed pistons on the A/C?
Fluid Film
-
How can you tell if the first aid kit has been opened?
Tamper seal broken, shear wire broken
-
When doing a engine water wash, are the engines actually running?
No, they are just windmilling.
-
Where can you find a list of the circuit breakers to pull before applying power?
GAI-010 WP 018 00
-
What are the gearbox capacities?
MGB-7.5 Gallons IGB & TGB - 2.75 pints
-
What is the engine capacity?
7.3 Quarts
-
What type of engine does the Romeo have?
T700-401C Turbine
-
What is the leak limitation on the main rotor head dampers?
5 drops per minute total
-
What are the four principes of ORM?
- 1. Accept risk when benefits outweigh cost.
- 2. Accept no unnecessary risk.
- 3. Anticipate and manage risk by planning.
- 4. Make risk decisions at correct level.
-
What are the five steps of ORM?
- 1. Identify hazards
- 2. Assess hazards
- 3. Make risk decisions
- 4. Implement controls
- 5. Supervise
-
What are the Hazard Probability Categories?
- A. Likely to occur immediately.
- B. Probably will occur in time.
- C. May occur in time.
- D. Unlikely to occur.
-
What are the Risk Assessment Codes?
- 1. Critical
- 2. Serious
- 3. Moderate
- 4. Minor
- 5. Negligible
-
What are visual differences b/t bravos and romeos?
- Mad Reeling machine
- Satcom Ant
- Link 16 Ant
- ESM Ant
- Chaff & Flare Buckets
- HF ANT
-
What indication does APX-123 give when its battery's life is low?
A lighted LED on the front panel
-
Where is the utility hydraulic reservoir located?
Oil cooler section.
-
How is proper servicing determined on the utility hydraulic reservoir?
The bands on the piston.
-
How are the bands on the utility hydraulic reservoir labeled?
Empty, refill, full, and overfull
-
When conducting a TA what position should the sonar reeling machine/pedestal be in?
Raised
-
Where is the sonobuoy launcher gauge located?
Port of the SO seat.
-
When the sonobuoy window is installed, what system should be tested?
IHEELS
-
What is the tire pressure for the tail tires?
100-110 PSI
-
What is the caution regarding the APX-123?
Do not let the battery die.
-
What alerts can be giving when performing the Transponder manual self-test?
*XPNDER TMPER - change WRA*XPNDER BATTERY -change battery
|
|