emerg. release arm connected to SIMUL control rod.
Right hand locks?
detent latche will not depress into the rail
release spacer between roller, allignment mark sat.
lock out pin stowed
lock tension at min. setting
horizontal oval point screw installed w/ slippage mark sat.
vertical set screw installed
Bomb rack?
ensure mount bolts installed in aft most holes
ensure it has return spring attached to manual release lever
check emerg. release system by pulling manual cocking cable
ensure locked by checking the release lever locking arm engages a minimum of 50% of the lower surface of the solinoid pin; buttons are in the full down position
pull manual release T-handle to ensure release
cable damage
wrapped?
woven?
no more than 3 broken wires per inch, per strand provided no more than 6 broken wires exist in a one-inch running lengthod cable. Not occur in any two consecutive inches.
no more than 3 broken wires per inch provided no broken wires are in the next consecutive inch.