-
explain sub-mixing and the benefits
the creation of musical stems to consolidate track counts
-
should we make headphone mixes pre or post fader?explain
pre fader;so the control room monitor fades dont change the send levels
-
explain parallel processing
using aux as an effects sends and returns to blend the effected and dry signals
-
time based effects should be used as a parallel effect
true(reverbs,delay,chorus,flanger..)
-
the decaying room ambience after a sound is known as
reverb
-
name 3 ways reverb is created
naturally, electro-mechanically,and digitally
-
name three type of cables found in the studio
xlr,1/4,and tt balanced/unbalanced
-
what is reverb with a gate added at the output
gated reverb
-
what configuration should a mic pre be wired as
normalled
-
what configuration should the direct outs be wired as
half normalled
-
what configuration should your outboard gear/efects be wired as
open
-
what is the term for the time it takes room ambience to reach -60db
rt-60
-
what is the parameter called when the output of an effect is sent back into the input
feedback
-
what is the unwanted bi-product for using an extremely short delay time
phasing
-
a sound superimposedon itself when small changes in delay and/or time is known as
phaser
-
a sound superimposed on itself with drastic changes to pitch and time/delay
flanging
-
what is it called when an individual sound with close to the timbre and nearly the same pitch are percieved as one
chorus
-
what parameter of an effect will follow the dynamics of the incoming signal
envelope follower
-
what monitoring mode should you use when you want to monitor the incoming signal at all times when record enabled
input only monitoring
-
what monitoring should you use when you want to monitor the incoming signal only when recording is taking place
auto input monitoring
-
what does rtas stand for?what is it supported by
pt le and hd
-
what is tdm?what does it stand for?
time division multiplexing:Pt hd only
-
what do we call it when a complex waveform has phase issues at some frequencies but other are untouched
comb filtering
-
what mode saves old data and creates a new file
normal/non destructive recording
-
what mode records over old data,replcing the old audio files and cannot be undone
destructive recording
-
the specified amount of time you set playback to start before your cursor selction is
pre-roll time
-
what is AUand what is it supported by
(AUDIO UNITS)it is supported by a large number of audio application cubase sonar logic etc
-
what is save as used for
to save a session under a new name and location
-
what is save a copy in used for
to save a session under a new name and location as well as a different version of the application
-
what will take all or multiple regions/files currently on a track and create a region/audio file
consolidate
-
what does TCE stand for and what does it do
time compression expansion:used to compress or expanda regions time without changing the pitch pitch of the signal
-
what is the purpose side chaning or external keying
the use of the dynamics from one sound source to control a dynamic effect such as a gate or compressor on another sound source
-
what does the identify synch point command aloww you to do
allows you to place a point anywhere in a region and place that selected point to a grid
-
give the procedure for creating a parallel reverb effect send with within a DAW
- 1)create a stereo aux
- 2)create a stereo send,on selected stereo track, to an available stereo buss
- 3)set the input of the aux to the selected buss
- 4)put a stereo reverb on the insert of the stereo aux and set level into mix as desired
-
what is a CENT when referring to pitch shifters and pitch correctors
1/100th of a semitone;there are 12 semitone per octave
|
|