In order for Health and Safety to provide maximum effectiveness, firm training objectives should be establishe and used. Which of the following requirements of training is the least important. Training objectives should be
D Written
Which of the elementslisted belong in the Halogen Group
C. F, Cl, Br, I
In industrial environments the concept of local exhaust ventilation is used extensively. The purpose of local exhaust ventilation is to:
A. Remove contaminants at their source
When conducting personal air-monitoring using solid-sorbent tube samplers, which of the following apply?
D. Tubes should be placed vertically to prevent channeling
The Life Safety Code includesthe term exit in an overall definition of means of egress. A means of egress includes three parts, which are: exit, the access, and the _______?
D. Exit discharge eith unobstructed path to the street
A worker in your plant was overcome in a confind space. Another worker who was sent to rescue him was also overcome. Which of the following types of respiratory protective equipment is the best choice for the next rescuer
C. Self Contained Breathing Apparatus
Which of the following best describes the function and use of the cyclone sampler
A. Removes non-respirable fraction of dust samples
According to the OSHA's Chemical Sampling Information, which of the following filters would be used for IH sampling of asbestos fibers?
C. MCEF 0.8
The center and in each chamber would most likely be which of the following
B. Wet Test Meter
Which of the following is designed to verify if the managment system is working, that the emergency management administrative function is adequate and that the lines of communication are operating
A. Tabletop Excersice
Which of the following basic precautions would be the most effective in reducing or preventing dermatitis in electroplaters
D. Use of Gloves
The determination of how much speech level interference is going to occur as a result of a new process could best be determined by
B. Octave Band Analysers
Which of the following would be classified as a Class A Fire
D. A fire involving ordinary combustables
According to the OSH's Chemical Sampling Information, which of the following filteres would be used for IH sampling of asbestoes fibers
C. MCEF 0.8 Micron Pore Size
If a person, who already experienced a threshold shift is exposed to a 100dB noice, how much noise reduction must be provided by hearing protection
A. 15 dB
A steel manufacturing plant with a $1,100,000 payroll sustains workers' compensation losses of $90,000 in cy 2003. The experience modification factor for this plant is 1.4 and the manual rate is $7.45 per $100.00 of payroll. what is the modification rate for this company
D. $10.43
Mod Rate = Manual rate X Em
7.45 x 1.4 = 10.43
Colorimetric tubes are often used in routine measurements in the Safety and Health field, which of the following explanations best describes the wide use of these tubes
D. Tubes are cheap and are easy to read
One method of controlling noise is by use of enclosures. Enclosures are designes to:
A: Isolate the individual from the noise source
B. Reduce the noise level at the source
C. Reduce the internal sound pressure build up
D. Increase the distance between the source and the receiver
C. Reduce the internal sound pressure build up
All of the following are disadvantages of fabric collectors except
C. Has a very poor efficiency
Under what conditions would the use of a 5000 fpm exhauset duct velocity be justified for extended periods in a ventilation system?
D. Reduce settling
General guidlines for cleaning up a minor spill of flammable or combustible material, includes all of the following EXCEPT:
C. Immediately notify OSHA of the spill
In which of the following conditions would the use of dilution ventilation be most appropriate?
D. The source of contamination is constant
What type of eye protection is required for other workers exposed to welding operations or individuals observing welding operations?
A. flame proof screens or googles
Which of the following is Public law 91-596?
B. Occupational safety and Health Act
When conducting personal air monitoring using solid sorbent tube samplers, which of the following instructions apply?
A. Tubes should be shaken to prevent packing
B Tubes should be placed vertically to prevent channeling
C. Tubes should be placed horizontially to prevent channeling
D. Tubes should be shaken to prevent breakthrough
B Tubes should be placed vertically to prevent channeling
The simplest and most effective way to display data to get an instant picture is the use of the?
C. Bar chart
American National Standard Z89.1 establishes specifications for hard hats to protect the heads of industrial workers from high voltage electrical shocks, Which of the following classes offers high voltage electral shock
C. E
E = High Voltage
G = Low voltage
Which of the following duties does not fall under the provisions of the Toxic Substance Control Act (TOSCA / TSCA)
A. Limit export
What is the velosity in feet per minute in a duct with a flanged opening if the hood static pressure is 2.45 in. water and the coefficient of entry is 0.82
D. 5140 fpm
Workers in which industry are effected by the disease silicosis
D. Quartz Miners
Quartz miners would be exposed to the fine quartz dust that can cause silicosis
One of the most important steps in the establishment of a training program is to be sound and obtainable. In which part of the training program developement should the objectives be established
C. As early as possible
Which of the following best describes the main objective of the Toxic Substance Control Act (TSCA)
C. Regulate the developement and distribution of toxic substances
Which of the following is the permitted worker exposure to ionizing radiation in the U.S.
B. 5 rem
Which of the following is considered to be the most frequent cause of the skin cancer Melanoma
C. Sunlight
According to OSHA at 1910.94 (ventilation), a spray booth operation should provide enough dilution air to reduce the vapor of flammable to ____ percent of the lower explosive limit
C. 25%
All of the following actions are required of a company that receives an OSHA citation except:
A. Retrain all the employees
Sampling often involves the use of filters to collect particulates. Standard filters are 37 mm in diameter and are usually placed in a closed face cassette with a back up pad to avoid contamination. The OSHA Asbestoes standard is an exception and requires the following
B. A Smaller open-face cassette
The OSHA Asbestoes Standard requires a 25 mm filter and open face casstte and a 50 mm extension cowl on the cassette.
An operation involving the melting of wire by means of an electric are or flame and the spraying of the atomized metal onto a surface is defined as:
D. Metalizing
Your company hires a worker unaware of his existing back problem. Three weeks later this person aggravates his back while on the job. Workers comp would
B. Pay 100% for a new injury
Since the company did not know about the existing problem and it was not documented, this would be treated as a new injury
Which of the following best describes a breathing zone
B. A hemisphere 6-9" in radius and forward of the shoulders
When discussing the cleaning of plant air in a ventilation system the process that uses carbon to remove contaminants or undesirable oders is known as:
B. Adsorption
According to 40 CFR, contingency plans must describe arrangements with the following EXCEPT
B. State OSHA
Which of the following best describes the science of Kinematics
B. Dealing with Motion
You are transiting the production area and you spot a safety hazard that presents an imminent danger to the area. You first action should be to:
D. Notify the area supervisor to get the hazard corrected
Which of the following best describes a class B level of PPE
D. Chemical resistant suit with a SCBA
When completing a Risk management Plan to comply with CFR 40 (The clean air act of 1970) you must plan for a minimum of ___ screneros
B. 1
Which of the following is not a recognized class of protective footwear.
A. Non-ionizing, worker safety shoe class EX radiation
Within General Industry, Lockout/Tagout programs only apply to electrical or high pressure utility systems
B. False
Which of the following groups of hydrocarbons would have the greatest chance of not being flammable?
C. Halogenated Hydrocarbons
Management has proposed to install a new manufacturing unit on the second floor of one of the buildings. The unit is 12x12' Sq. and weighs 18000 lbs. When you are doing your initial evaluation you find engineering drawling that state "the maximum floor loading for the proposed location is 150 PSF" Can this be installed safety?
C. Yes, Load is under max by 25 psf
Which of the following two laws combine to form the combined gas law?
B. Boyles and Charles
According to OSHA when local exhaust systems are used for welding operations which of the following two factors are used in combination with the distance from the welding operation to obtain sufficient air flow?
B. CFM and duct size
What type of air respirator should be used for entry into an abandoned well 30 feet deep
B. Airline with supplied escape bottle
At what depth must a trench be provided with a means of egress such as a stairway, ladder, etc
B. 4' or greater
The means plus two standard deviations, estimates what percentage of the distribution in a normal distribution?
D. 95.5%
Which of the following lists the three distinct parts of a "Means of Egress"
A. Exit access, exit, and exit discharge
Noise measuresments produce readings of 84.1 dBC and 84.8 dBA. In which of the following frequency ranges would you most suspect high noise levels?
D. 1000-3000
Section 1910.1000 (Air Contaminants) of the general industry standard would be classified as what kind of standard
D. Performance
This is a performance standard that deals with more than one industry AKA a horizonal standard
Which of the following is a characteristic of heat stroke
B. Elevated body temp
The physiological property of matter that defines the capacity of a chemical to harm or injure a living organism by other than mechanical means is the definition for:
C. Toxicity
In accordance with the Toxic Substance Control Act of 1976 which of the following statements are incorrect.
B. Companies are required to notify the EPA 120 days before manufacturing a new chemical
An exhaust system was designed to develop 4800 fpm exhaust duct velocity. Why would the high flow rate be selected?
B. To reduce settling of transport material
Which of the following best describes the term LD50?
A. The amount of material that kills 50% of laboratory animals
You are a maintenence and repair worker that needs to do maintenence on a piece of equipment. A typical lockout routine would include all the following except.
A. Place a MACHING UNDER REPAIR sign at the control that can be easily removed.
